| ID | | Article Title | Post Date |
|
72 | 
| The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD. | May-12-09 |
|
73 |
| What are the known incompatibilities with the Crescendo/PCI G4 700 and 800? | May-12-09 |
|
74 |
| Why can't I run Mac OS 9.2 on my computer upgraded with a Crescendo/PCI G4 800 (or 700)? | May-12-09 |
|
169 |
| May I discard my original CPU after installing Sonnet's upgrade cards?
| May-07-09 |
|
171 |
| The speed indicated on the G3 or G4 chip on my Sonnet processor upgrade doesn't seem to match the speed of the upgrade I purchased. What's the story? | May-07-09 |
|
175 |
| The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD while using Mac OS 9. | May-07-09 |
|
218 |
| The computer's standard startup process takes noticeably longer after upgrading to any Mac OS 9.x system from Mac OS 8.6 or earlier. | May-12-09 |
|
228 |
| System will not finish start-up process. Hang or crash occurs before desktop appears. | Jun-23-09 |
|
229 |
| After installing my new Crescendo/PCI processor upgrade in a Power Tower Pro, I can hear the boot chime when I turn the computer on, but the video display never comes up. | May-12-09 |
|
230 |
| After installing a Crescendo/ PCI G4 700 or 800 MHz upgrade, I opened Apple System Profiler and it is reporting the processor type as unknown and the speed as 450 MHz. | May-12-09 |
|
231 | 
| After following the instructions and installing both the Crescendo/PCI G4 700 or 800 MHz upgrade card and its included software into my computer, the video is distorted and my cursor is a rectangular block that cannot move more than halfway down the screen. | Jun-23-09 |
| Some Mac clones andPower Macintosh computers do not have onboard video, but instead use a separate video card (ATI XClaim 3D, ATI Mach 64, IX Micro Twin Turbo, or IX Micro Ultimate Rez) installed in a PCI slot. These cards are anywhere from 4-6 years old and have not had software or firmware updates in several years. The lack of updated firmware and software, when combined with the G4 chips used on these high-speed upgrades, result in this instability.
Solution 1: If your system is running Mac OS 9.x, turn off the video card's extensions in the Extensions Manager Control Panel.
Solution 2: Replace the video card with one that has current software/firmware or with an older video card compatible with these systems such as the ATI Radeon Mac edition and the ATI Radeon 7000 Mac edition. |
| |
|
233 |
| G4 performance drops following Mac OS 9.x system software update. | May-12-09 |
| |
