Tempo SATA
Please click the arrow next to the category to expand or collapse:
Driver (1)
Firmware (0)
Manual (0)
No Manual was found for product.
 
FAQ (13)
IDArticle TitlePost Date
36 What are the benefits of supporting Spread Spectrum Clocking (SSC)?Mar-02-10
37 Is it possible to boot from a volume that resides on the Tempo SATA card?Mar-02-10
39 Can I hot-swap a disk drive that is attached to any Sonnet Tempo Serial ATA card?Mar-23-10
40 How does hot-swap functionality work?Mar-02-10
63 Can I operate two Tempo SATA cards in the same system?Sep-02-09
106 Is Tempo SATA E4P, E4i, X4P, or X4i compatible with Red Hat Linux?Sep-02-09
120 How do I set up a RAID 0 striped array under Windows XP Professional or Vista?Mar-23-10
121 Can I set up a RAID 1 mirrored array under Windows XP or Vista?Mar-23-10
165 Tempo SATA or Tempo SATA RAID133 won't boot from Mac OS 9.x when it is installed in a partition greater than 190GB.Apr-25-10
193 Is target disk mode supported on TSATA?May-12-09
206 The Tempo SATA card does not seem to work properly in my Power Mac G4. Do I need different firmware?Apr-25-10
207 Why can't I install Mac OS X 10.5 (Leopard) on a drive attached to the Tempo SATA card?May-12-09
757 My Stardom RAIDSonic ST3620-2S-S2 is not reliable with 6Gb drives and and a 6Gb controller.Jul-08-13
The Stardom RAIDSONIC ST3620-2S-S2 is not reliable when connected at 6Gb. It was designed for 3Gb SATA. If you connected previously using a 3Gb controller, even with 6Gb drives, the connection was 3Gb. With the 6Gb controllers and 6Gb drives, the connection is negotiated at 6Gb, but the connection is not reliable because of the older design of the Stardom chassis does not support 6Gb. The drives may not be recognized or if recognized, transfers will fail at some point.