| ID | | Download Title | Download Link | Post Date |
|
1032 | 
| Solo10G/McFiver Software (Linux) | | Dec-20-22 |
|
1209 | 
| Solo10G Windows Auto Update Instructions 2.2.2.0 | | Mar-01-2023 |
| Operating System Requirements: Windows 11
Installation procedure.
If you are using the Solo10G Thunderbolt adapter or PCIe card on a Windows computer, make sure you are connected to Wi-Fi or ethernet through some means other than the Solo10G Thunderbolt adapter or PCIe card.
1. Install the Solo10G PCIe card and boot your computer, or connect the Solo10G Thunderbolt adapter to a Thunderbolt 3 or 4 port of your computer. You should get a popup to approve the device. If you do not get a popup, launch the Thunderbolt Control Center application and approve the device.
2. Download and install the driver.
- On Windows 11, navigate to Windows Update and select Check for Updates. You should see Marvell - Net 2.2.2.0 begin to download and install.
3. After the installation is complete, reboot the computer. Now you should be running driver 2.2.2.0, which you can check by going to Device Manager -> Network adapters -> Solo10G Thunderbolt 3 Edition and right clicking to view Properties. In the Properties window, select Driver; Driver Version should say 2.2.2.0. |
| |
|
1222 |
| 10GbE Windows Driver for Solo10G Thunderbolt Adapter and PCIe Card, Solo10G SFP+ PCIe Card, McFiver, Echo 20 Thunderbolt 5 SecureDock, and Echo 21 Thunderbolt 5 SuperDock 3.1.7 | | Mar-20-2023 |
| |
