Encore/ZIF G3 & G4
Please click the arrow next to the category to expand or collapse:
Driver (2)
IDDownload TitleDownload LinkPost Date
153 Encore Firmware Updater Installer (Mac OS X 10.3-10.4)May-08-19
154 SonnetCache Enabler (Mac OS X) 1.4Aug-07-2009
Operating System Requirements: Mac OS X 10.1-10.4
Description: This software enables Sonnet Crescendo/PCI and Encore/ZIF processor upgrade cards' L2 and L3 caches under Mac OS X. It will also correctly report the size and speed of the caches and the processor speed to the Mac OS X kernel.
Supported Processor Upgrade Cards: Crescendo/PCI and Encore/ZIF G4
Note: This software is not used with any other Sonnet processor upgrade card. This software does not enable you to install Mac OS X.
 
 
Firmware (0)
No Firmware was found for product.
 
Manual (2)
IDDownload TitleDownload LinkPost Date
269 Encore/ZIF Processor Upgrade User's ManualMay-08-19
270 Encore/ZIF 1.0 GHz Processor Upgrade User's GuideMay-08-19
 
FAQ (13)
IDArticle TitlePost Date
72 The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD.May-12-09
78 Why does the Encore/ZIF (700MHz and faster) require that my Blue & White or PCI Graphics G4 bus speed be slowed to 66MHz? Doesn't that slow down my computer?May-12-09
169 May I discard my original CPU after installing Sonnet's upgrade cards? May-07-09
171 The speed indicated on the G3 or G4 chip on my Sonnet processor upgrade doesn't seem to match the speed of the upgrade I purchased. What's the story?May-07-09
175 The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD while using Mac OS 9.May-07-09
218 The computer's standard startup process takes noticeably longer after upgrading to any Mac OS 9.x system from Mac OS 8.6 or earlier.May-12-09
238 System will not start following installation of the processor upgrade card, or may fail shortly after restart. IMPORTANT! Do not continue attempts to restart—immediately unplug your computer.May-12-09
239 Encore firmware updater must be run to allow installation of a G4 processor in these machines, but this software is not available for Mac OS X.Jun-25-09
240 During Crescendo/Encore Install 1.4.6 software installation, the system displays an error message stating "Your computer's firmware does not have the Sonnet G4-enabling patch installed."May-12-09
241 While applying the Sonnet G3 firmware patch on a Power Macintosh G3 (Blue & White) computer, the updater stops and either: a) The error message, "Assertion (modPtr) failed in firmwareUpdater.c on line 236" appears. OR b) Your system boots to the desktop and a message stating, "Your computer's firmware does not have the Sonnet G4-enabling patch installed" appears.Jul-23-09
242 After following all of the instructions in the included User's Quick Start Guide and installing the Encore/ZIF G4 upgrade card, the computer freezes at random during boot up or boots to the desktop without any issues, but crashes randomly, and/or programs unexpectedly quit.May-12-09
243 After removing and replacing my Encore/ZIF card during the course of troubleshooting, or after moving it from one machine to another, my computer has stopped booting, or started crashing shortly after booting.May-12-09
244 After following all of the instructions in the included User's Quick Start Guide and installing the Encore/ZIF G4 upgrade card, my computer crashes during boot up. The computer generates the boot chime and video is displayed, however, the boot process stops with just a cursor on screen.May-12-09