Crescendo/7200 G3 & G4
Please click the arrow next to the category to expand or collapse:
Driver (1)
IDDownload TitleDownload LinkPost Date
151 Crescendo/7200 Processor Upgrade Software (OS 7.5.3-OS 9.1) 1.1Aug-07-2009
Operating System Requirements: Mac OS 7.5.3-9.1
Description: This installer software is required with Crescendo/7200 processor upgrade cards. Version 1.1 expands compatibility to virtually all PCI cards and further increases memory compatibility. It also installs the proper software enablers and Metronome utility into your System Folder.
Note: This software is specifically for the Power Macintosh 7200 and 8200 and is the only software required. For the most current information regarding the software, check the onscreen Read Me notes of the installer.
 
 
Firmware (0)
No Firmware was found for product.
 
Manual (1)
IDDownload TitleDownload LinkPost Date
256 Crescendo/7200 Processor Upgrade Card Use's GuideMay-08-19
 
FAQ (9)
IDArticle TitlePost Date
69 What are the known incompatibilities with the Crescendo/7200 v1.1?May-12-09
71 What type of RAM can I add to my Crescendo/7200 card?May-12-09
85 System will not boot, or consistently crashes early in start-up.Jan-28-10
171 The speed indicated on the G3 or G4 chip on my Sonnet processor upgrade doesn't seem to match the speed of the upgrade I purchased. What's the story?May-07-09
177 System will not boot, or consistently crashes early in start-up with a Crescendo/7200 upgrade card installed in computer.May-07-09
218 The computer's standard startup process takes noticeably longer after upgrading to any Mac OS 9.x system from Mac OS 8.6 or earlier.May-12-09
221 After installing the Sonnet Crescendo/7200 into a machine with two other PCI cards, or adding an additional PCI card to a machine already running the 7200 upgrade, the computer does not boot past the "Happy Mac" icon. If I remove either one of the PCI cards or the upgrade, the computer will boot without a problem. The same is true if I boot up holding down the SHIFT key to boot with extensions off.May-07-09
222 After installing the Sonnet Crescendo/7200 into my machine, making sure I followed the instructions on RAM distribution, the computer does not boot past the "Happy Mac" icon. If I remove the 7200 upgrade, the computer will boot without a problem. The same is true if I boot up holding down the SHIFT key to boot with extensions off.Aug-06-09
223 After installing the Sonnet Crescendo/7200 into a machine with 128MB RAM DIMMs, or adding 128MB RAM DIMMs to the machine that already was running the 7200 upgrade, the computer does not boot past the "Happy Mac" icon. The DIMMs work when installed alone on the logic board without the 7200 upgrade installed. If I remove either the 128MB RAM DIMMs or the processor upgrade, the computer will boot without a problem. The same is true if I boot up holding down the SHIFT key to boot with extensions off.May-07-09