| ID | | Article Title | Post Date |
|
36 | 
| What are the benefits of supporting Spread Spectrum Clocking (SSC)? | Mar-02-10 |
|
37 |
| Is it possible to boot from a volume that resides on the Tempo SATA card? | Mar-02-10 |
|
39 |
| Can I hot-swap a disk drive that is attached to any Sonnet Tempo Serial ATA card? | Mar-23-10 |
|
40 |
| How does hot-swap functionality work? | Mar-02-10 |
|
42 | 
| Can the Tempo SATA cards co-exist with other manufacturers' Serial ATA cards? | Oct-27-09 |
| Often, yes. Sometimes, not. Some other manufacturers' drivers may incorrectly assume a Sonnet card is their SATA card which may cause havoc. The symptoms include significantly slower performance, driver not loading, or both drivers loading and causing and kernel panics as they both try to access the same card. Sonnet recommends removing other manufacturer's card(s) and driver(s) if a problem of this type occurs. |
| |
|
63 |
| Can I operate two Tempo SATA cards in the same system? | Sep-02-09 |
|
67 |
| What kind of performance can I expect from a using a Sonnet Tempo SATA Card in a PCI slot (like in a Power Mac G4)? | Oct-12-09 |
|
96 |
| Is Tempo SATA X4P compatibility with all sub-versions of Mac OS 10.4? | Oct-13-09 |
|
100 |
| Mirrored (RAID 1) will sometimes hang on erase volume. | May-11-09 |
|
118 |
| Unable to connect Sonnet Tempo eSATA locking cable to a Tempo SATA E4P card in an Apple Xserve. | May-06-09 |
|
120 |
| How do I set up a RAID 0 striped array under Windows XP Professional or Vista? | Mar-23-10 |
|
121 |
| Can I set up a RAID 1 mirrored array under Windows XP or Vista? | Mar-23-10 |
|
170 |
| Tempo SATA X4P: 1) Although labeled a 3726, software identifies the drive enclosure's port multiplier as a Silicon Image 4726, but without the RAID features 2) With no drives in the enclosure, Disk Utility shows a "phantom" SV-2000 device 3) Completely unpredictable performance and reliability of drives mounted in these enclosures. | May-07-09 |
|
404 |
| The Sonnet Tempo SATA card does not work with my Western Digital My Book Premium ES Edition, or Seagate Technology FreeAgent Pro. | Mar-02-10 |
|
452 |
| I upgraded my Tempo SATA software in a PowerMac G4 or G5 and the card is giving a lot of system errors. | Oct-12-09 |
|
454 |
| I have connected a large hardware RAID volume (for example, a 4TB Fusion D400QR5) to a Sonnet Pro SATA card in a Macintosh, and it is showing up as only 2TB. Why? | Oct-14-09 |
| Under Mac OS X 10.3 and 10.4, a volume greater than 2TB will show as a 2TB volume due to a limitation in Apple's ATA layer (just above the driver). Sonnet plans to provide a 10.4 fix in the next driver release. Under Mac OS X 10.5 and 10.6, the full capacity of the RAID volume is available. |
| |
|
459 |
| The performance of my drive array is significantly less than I expect. | Jun-14-11 |
|
491 |
| Are Sonnet Tempo SATA cards compatible with the Drobo S? | Feb-02-11 |
|
544 |
| How do I uninstall the Sonnet Pro SATA Driver? | Dec-26-10 |
|
757 |
| My Stardom RAIDSonic ST3620-2S-S2 is not reliable with 6Gb drives and and a 6Gb controller. | Jul-08-13 |
| The Stardom RAIDSONIC ST3620-2S-S2 is not reliable when connected at 6Gb. It was designed for 3Gb SATA. If you connected previously using a 3Gb controller, even with 6Gb drives, the connection was 3Gb. With the 6Gb controllers and 6Gb drives, the connection is negotiated at 6Gb, but the connection is not reliable because of the older design of the Stardom chassis does not support 6Gb. The drives may not be recognized or if recognized, transfers will fail at some point. |
| |
| |
