| Please click the arrow next to the category to expand or collapse: |
 | Driver (3) | | | ID | | Download Title | Download Link | Post Date |
|
1032 | 
| Solo10G/McFiver Software (Linux) | | Dec-20-22 |
|
1209 | 
| Solo10G Windows Auto Update Instructions 2.2.2.0 | | Mar-01-2023 | | Operating System Requirements: Windows 11
Installation procedure.
If you are using the Solo10G Thunderbolt adapter or PCIe card on a Windows computer, make sure you are connected to Wi-Fi or ethernet through some means other than the Solo10G Thunderbolt adapter or PCIe card.
1. Install the Solo10G PCIe card and boot your computer, or connect the Solo10G Thunderbolt adapter to a Thunderbolt 3 or 4 port of your computer. You should get a popup to approve the device. If you do not get a popup, launch the Thunderbolt Control Center application and approve the device.
2. Download and install the driver.
- On Windows 11, navigate to Windows Update and select Check for Updates. You should see Marvell - Net 2.2.2.0 begin to download and install.
3. After the installation is complete, reboot the computer. Now you should be running driver 2.2.2.0, which you can check by going to Device Manager -> Network adapters -> Solo10G Thunderbolt 3 Edition and right clicking to view Properties. In the Properties window, select Driver; Driver Version should say 2.2.2.0. | | |
|
1222 |
| 10GbE Windows Driver for Solo10G Thunderbolt Adapter and PCIe Card, Solo10G SFP+ PCIe Card, McFiver, Echo 20 Thunderbolt 5 SecureDock, and Echo 21 Thunderbolt 5 SuperDock 3.1.7 | | Mar-20-2023 | | |
| 
| Firmware (1) | |
| Manual (1) | | FAQ (3) | | | ID | | Article Title | Post Date |
|
814 |
| I'm getting low throughput on macOS. How can I fix this? | May-26-22 |
|
993 |
| My system crashes, freezes, or fails to connect when I talk to a storage device on the network | May-13-22 |
|
1081 |
| I see the Solo10G in macOS, but it is not making a reliable network connection. | May-13-22 | | Your network preferences may be corrupt...
1) Go to System Preference..."Network".
2) Record your Network setups.
3) Select: Locations: Edit Locations.
4) Select each location except Automatic and click "-" to delete.
5) Click Apply.
6) Delete each of your 10GbE Network Ports by selecting each of them and clicking "-".
7) When you see the dialog box asking if you would like the controllers to return, click No.
8) Click Apply.
9) Click + to add your 10GbE networks connections.
10) Set them up from your notes.
11) Click Apply.
12) Wait five minutes for the system to refresh the settings.
If that doesn't work, delete the following two files with the terminal commands:
sudo rm /Library/Preferences/SystemConfiguration/NetworkPreferences.plist
sudo rm /Library/Preferences/SystemConfiguration/preferences.plist
Restart and recreate your network settings.
If that doesn't work, contact support@sonnettech.com. Be sure to save and send a System Report. | | | | |
|
|
|
