Fusion DX800RAID
Please click the arrow next to the category to expand or collapse:
Driver (9)
IDDownload TitleDownload LinkPost Date
379 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X 10.6.8-10.8.5) 4.07
Download Now
Oct-17-2012
380 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Windows) 4.07
Download Now
Oct-11-2012
408 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Linux)
Download Now
May-08-19
492 Sonnet Pseudo Drivers for SAS Expanders embedded in Sonnet DX800RAID and RX1600RAID (Windows XP and Vista) 1.0.1
Download Now
Feb-11-2010
531 Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (macOS) 3.76
Download Now
532 Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (Windows) 2.75
Download Now
Operating System Requirements: Windows 8, Windows 8 (64-bit), Windows 8.1, Windows 10, Windows 10 (64-bit), Windows Server 2008 (32-bit), Windows Server 2008 (64-bit), Windows Server 2008 R2 (64-bit), Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Description: This software includes the latest flash bundle, driver, and ConfigTool application software for the Sonnet 6Gb/s SAS/SATA RAID controller card (R680) included with Fusion DX800RAID (newer models), Fusion DX800RAID Thunderbolt Edition, and Fusion RX1600RAID (part number FUS-RX16S6-xxTB) storage systems.

Important Note:
• You must update the firmware and driver software before updating to the latest Configuration Tool application.

 
533 Sonnet 6Gb/s SAS/SATA RAID (R680) Controller Software (Linux)
Download Now
Nov-06-17
716 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X Versions 10.4.11 through 10.5.8) 3.38
Download Now
Oct-18-2011
1008 Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Config Tool (macOS) 4.27
Download Now
Mar-09-2018
Operating System Requirements: macOS 10.10+
Description: The ATTO Config Tool offers remote management features that allow you to set up, optimize and manage both locally and remotely connected ATTO storage controllers. Refer to the product manual for details. Download the tool to your Mac and double click the file to launch the installer.
 
 
Firmware (0)
Manual (5)
FAQ (10)
IDArticle TitlePost Date
91 Installation of the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro with a Fusion D800RAID, R800RAID, or D400RAID storage system.May-12-09
202 Under Mac OS X 10.5.6, the PCI Express Expansion Slot Utility (early Mac Pro) always reports 8x, 1x, 1x, 16x no matter how its set.May-06-09
301 Formatting a drive array greater than 16TB with APT (Apple Partition Table) fails in a Macintosh.Jun-16-09
302 I connected two Fusion DX800 (RX1600) RAIDs to the same controller, but only one show up to the ATTO configuration tool and the OS.May-20-09
387 How do I replace a failed drive under warranty if I'm in a sensitive/classified environment and can't send the old one back?Mar-23-10
445 What is the default drive timeout in Fusion RAID systems? Should I change it?Mar-24-10
450 My storage shows 10% more capacity under OS X 10.6 than under OS X 10.5. Why?Mar-24-10
737 I daisy-chained two DX800s and my drives don't show up.Mar-08-18
775 Does the ATTO R380 Support OS X 10.9 (Mavericks)?Oct-21-13
955 Can I use Seagate Iron Wolf drives; or Hitchai and WD drives 8TB and larger?May-31-18
Some newer drives use a hole pattern different from the traditional drive hole pattern for the bottom mounting points. The location of the bottom holes close to the connector did not change; however, the bottom holes near the middle have been removed and replaced with bottom holes close to the front of the drive.

The drives with the new bottom hole pattern include:
Seagate Iron Wolf drives (also missing the middle hole from the side mount hole troika)
Hitachi drives 8TB and larger
WD drives 8TB and larger

Incompatible mount holes
Echo 15+ Dock (side mount, but needs middle hole, so incompatible with only Seagate Iron Wolf)
Fusion F3 (bottom mount)
Fusion D400Q/R400P/D500P (bottom mount)
Fusion D800/R800 (bottom mount)

Compatible mount holes
Fusion R400S RAID (side mount)
Fusion R400 RAID USB 3 (side mount)
Fusion DX800/RX1600 (side mount) If using Iron Wolf line, must use Iron Wolf Pro with rotational vibration sensors