Fusion D500P
Please click the arrow next to the category to expand or collapse:
Driver (0)
No Driver was found for product.
 
Firmware (0)
Manual (3)
FAQ (11)
IDArticle TitlePost Date
101 Fusion storage system activity lights are always on with Seagate ES.2 (Enterprise) drives installed in the drive bays.Oct-22-10
Sonnet engineering has fixed this issue with some Fusion storage systems. This issue was addressed and fixed as follows:

APRIL, 2008: in Fusion D400Q and Fusion D500P systems with serial numbers beginning with J.
MAY 20, 2008: In Fusion D800RAID with serial numbers beginning with G.
All versions of Fusion R400Q and R800RAID are compatible with Seagate ES.2 Drives.

Note: Seagate ES.2 drives have lower performance than Sonnet recommended drives.
 
120 How do I set up a RAID 0 striped array under Windows XP Professional or Vista?Mar-23-10
121 Can I set up a RAID 1 mirrored array under Windows XP or Vista?Mar-23-10
138 Unable to format hard drives after moving a Fusion storage system from a Mac to Windows computer.Mar-23-10
387 How do I replace a failed drive under warranty if I'm in a sensitive/classified environment and can't send the old one back?Mar-23-10
450 My storage shows 10% more capacity under OS X 10.6 than under OS X 10.5. Why?Mar-24-10
453 Only the first drive of my Fusion D400Q, D500P, R400P, or R400Q is recognized when I connect via SATA. Why?Mar-24-10
459 The performance of my drive array is significantly less than I expect.Jun-14-11
822 What hard drives does Sonnet recommend for 4-drive desktop systems?Nov-05-15
In addition to specific drives that Sonnet has qualified, Sonnet recommends using hard disk drives that are qualified by the manufacturer for desktop NAS systems.

Drive Family Enterprise Warranty RPM Cache Rotational Reference
(years) (MB) Vibration
Compensation
HGST Deskstar NAS 3 7200 64-128 Yes www.hgst.com/hard-drives/internal-drive-kits/nas-desktop-drive-kit
HGST Ultrastar \u8730 5 7200 64 Yes www.hgst.com/hard-drives/internal-drive-kits/performance-drive-kits
Seagate NAS HDD 3 5900 64 (1) www.seagate.com/products/network-attached-storage/nas-drives/
Seagate Enterprise NAS \u8730 5 7200 128-256 Yes www.seagate.com/products/network-attached-storage/nas-drives/
Seagate Enterprise Cap. \u8730 5 7200 128-256 Yes www.seagate.com/products/network-attached-storage/nas-drives/
Toshiba Sonace I \u8730 3 7200 64 Yes toshiba.semicon-storage.com/ap-en/product/storage-products/specialty/md03acaxxxv.html
Toshiba Sonance II \u8730 3 5400 128 Yes toshiba.semicon-storage.com/ap-en/product/storage-products/specialty/md04abaxxxv.html
WD Red 3 5400 16-64 (2) www.wdc.com/en/products/internal/nas/
WD Red Pro 5 7200 64-128 Yes www.wdc.com/en/products/internal/nas/
WD Re \u8730 5 7200 32-128 Yes www.wdc.com/en/products/internal/nas/


(1) Rotational Vibration Tolerance
(2) 3D Active Balance Plus
 
872 I upgraded the hard drives in my D500P to larger drives and only one drive is showing up.Nov-29-15
955 Can I use Seagate Iron Wolf drives; or Hitchai and WD drives 8TB and larger?May-31-18
Some newer drives use a hole pattern different from the traditional drive hole pattern for the bottom mounting points. The location of the bottom holes close to the connector did not change; however, the bottom holes near the middle have been removed and replaced with bottom holes close to the front of the drive.

The drives with the new bottom hole pattern include:
Seagate Iron Wolf drives (also missing the middle hole from the side mount hole troika)
Hitachi drives 8TB and larger
WD drives 8TB and larger

Incompatible mount holes
Echo 15+ Dock (side mount, but needs middle hole, so incompatible with only Seagate Iron Wolf)
Fusion F3 (bottom mount)
Fusion D400Q/R400P/D500P (bottom mount)
Fusion D800/R800 (bottom mount)

Compatible mount holes
Fusion R400S RAID (side mount)
Fusion R400 RAID USB 3 (side mount)
Fusion DX800/RX1600 (side mount) If using Iron Wolf line, must use Iron Wolf Pro with rotational vibration sensors