| ID | | Article Title | Post Date |
|
814 | 
| I'm getting low throughput on macOS. How can I fix this? | May-26-22 |
|
993 | 
| My system crashes, freezes, or fails to connect when I talk to a storage device on the network | May-13-22 |
| Go to System Preferences...Network.
Select the 10GbE port and click "Advanced..."
Select the Hardware tab.
If Jumbo packets are on, turn them off, click OK and click Apply.
If that fixes the problem, then stay at Standard (1500), or check the Jumbo packet setting of every switch and device in the path.
If that doesn't fix the problem, check Flow Control.
If Flow Control is off, turn it on; or if it is on, turn it off. Not all devices support flow control, or the absence of flow control. |
| |
|
1015 |
| Can I connect a Solo10G Thunderbolt 3 Edition Adapter to a Thunderbolt 2 Mac? | May-13-22 |
|
1041 |
| Upon connecting the Solo10G, I see an error message "Accessory Needs More Power" | May-13-22 |
|
1044 |
| My 10G/25G adapter performance drops significantly on a laptop when battery level is low. | Mar-20-23 |
| When the battery level drops below ~20% on a MacBook Pro or MacBook Air, macOS will decrease 10/25G Ethernet transmit performance in order to conserve battery life for the laptop. |
| |
|
1081 |
| I see the Solo10G in macOS, but it is not making a reliable network connection. | May-13-22 |
| Your network preferences may be corrupt...
1) Go to System Preference..."Network".
2) Record your Network setups.
3) Select: Locations: Edit Locations.
4) Select each location except Automatic and click "-" to delete.
5) Click Apply.
6) Delete each of your 10GbE Network Ports by selecting each of them and clicking "-".
7) When you see the dialog box asking if you would like the controllers to return, click No.
8) Click Apply.
9) Click + to add your 10GbE networks connections.
10) Set them up from your notes.
11) Click Apply.
12) Wait five minutes for the system to refresh the settings.
If that doesn't work, delete the following two files with the terminal commands:
sudo rm /Library/Preferences/SystemConfiguration/NetworkPreferences.plist
sudo rm /Library/Preferences/SystemConfiguration/preferences.plist
Restart and recreate your network settings.
If that doesn't work, contact support@sonnettech.com. Be sure to save and send a System Report. |
| |
|
1123 |
| I upgraded macOS Big Sur to version 11.1, and my Solo10G stopped working. | May-13-22 |
|
1157 |
| On my older TB3 Mac, my 10GbE sometimes becomes non-responsive. | May-13-22 |
| If you are using a MacBook Pro (2016), iMac Pro (2017), iMac (2017) or iMac (2019), and you are connecting another Thunderbolt device to an adjacent TB3 port; and your 10GbE becomes non-responsive (but may still appears as available), then connecting your Solo10G or Twin10G to the Thunderbolt port on the right may resolve the issue. |
| |
|
1188 |
| My Solo10G fails to enumerate. | Jun-02-22 |
|
1194 |
| My Solo10G crashes on my HP Zbook. | Aug-13-22 |
|
1214 |
| My Solo10G isn't working with my Lenovo Thinkpad P15 | Mar-23-23 |
| |
