| ID | | Article Title | Post Date |
|
808 | 
| What 10GBase-T switches and PCIe cards has Sonnet tested for interoperability? | Dec-22-19 |
|
809 |
| What reasonably-priced 10GBASE-T switches can Sonnet recommend? | Dec-22-19 |
|
814 |
| I'm getting low throughput on macOS. How can I fix this? | May-26-22 |
|
972 | 
| After I upgraded macOS, the Twin10G, Presto 10GbE, or other Sonnet PCIe card that requires a driver is not loading. | Dec-22-19 |
| If you have already installed a Sonnet Driver and it is not loading:
1) Restart (forces Mac OS to scan for unloaded drivers).
2) Go to System Preferences...Security & Privacy panel...General tab. You will see a message, "System software from developer "Sonnet Technologies" was blocked from loading." Click Allow. Note that you must have a hard-wired mouse/trackpad to click allow. If you are connecting via Remote Access, then macOS prevents you from clicking Allow.
3) Restart. |
| |
|
974 |
| Can I get increased performance from Link Aggregation in macOS? | Dec-22-19 |
|
993 |
| My system crashes, freezes, or fails to connect when I talk to a storage device on the network | May-13-22 |
| Go to System Preferences...Network.
Select the 10GbE port and click "Advanced..."
Select the Hardware tab.
If Jumbo packets are on, turn them off, click OK and click Apply.
If that fixes the problem, then stay at Standard (1500), or check the Jumbo packet setting of every switch and device in the path.
If that doesn't fix the problem, check Flow Control.
If Flow Control is off, turn it on; or if it is on, turn it off. Not all devices support flow control, or the absence of flow control. |
| |
|
994 |
| My Twin10G or Presto 10GbE is not working on macOS. | Dec-22-19 |
|
1053 |
| Microsoft Ending Support for Windows 7 | Apr-04-19 |
| Original release date: March 19, 2019
All software products have a life-cycle. After January 14, 2020, Microsoft will no longer provide security updates or support for PCs running the Windows 7 operating system. After this date, this product will no longer receive free:
• Technical support for any issues
• Software updates
• Security updates or fixes
Computers running the Windows 7 operating system will continue to work even after support ends. However, using unsupported software may increase the risks from viruses and other security threats.
The Cybersecurity and Infrastructure Security Agency (CISA) encourages users and administrators to upgrade to a currently supported operating system. For more information, see the Microsoft End of Support FAQ.
|
| |
|
1065 |
| I'm getting very slow performance with my Presto 10G PCIe card or Twin10G Thunderbolt 10G adapter with OS X 10.11-10.12. | Dec-22-19 |
| In macOS 10.11 and 10.12, SMB signing is turned on by default. This is no problem for gigabit ethernet, but SMB Signing severely limits the performance of 10 gigabit ethernet. Apple has published a tech note how to turn off SMB signing: "Turn off packet signing for SMB 2 and SMB 3 connections". This note requires the use of the terminal application and a number of terminal commands, so some familiarity with those tools is required.
In macOS 10.13.6+, Apple has turned off SMB signing by default. |
| |
|
1067 |
| How and when to use two Ethernet ports on a Mac | May-16-22 |
|
1152 |
| Does the Twin10G Thunderbolt Adapters or Presto 10GbE PCIe cards support NIC Teaming under Windows? | May-28-21 |
| |
