| ID | | Article Title | Post Date |
|
871 | 
| I can't boot over 10GE from my cylinder Mac Pro. | Nov-29-15 |
| Please upgrade the EEPROM firmware adapter using the following instructions. This upgrade will address the Mac Pro cylinder boot issue.
For Mac OS X customers upgrading in the field:
1) Install the Mac OS X Myri10GE driver.
2) Download the myri-eeprom-1.4.59.mcp2 and the mac myri-tools tarball.
https://www.myricom.com/pub/10g-tools/myri-eeprom-1.4.59.mcp2
https://www.myricom.com/pub/10g-tools/mac-10g-toolkit.tgz
3) Untar the mac myri-tools tarball.
4) Run 'sudo sysctl -w net.myri10ge.enX.enable_10gtools=1' where enX is the name of device for the Myricom adapter.
For more details, please read the FAQ entry:
https://www.myricom.com/software/myri-10g-network-adapter-tool-kit/846-do-you-provide-myri-info-and-ze-upgrade-for-mac-os-x.html
5) Run 'sudo ze-upgrade myri-eeprom-1.4.59.mcp2' and reboot.
If there is a verification failure with the ze-upgrade command, please re-run the command. |
| |
|
993 | 
| My system crashes, freezes, or fails to connect when I talk to a storage device on the network | May-13-22 |
|
994 |
| My Twin10G or Presto 10GbE is not working on macOS. | Dec-22-19 |
|
1065 |
| I'm getting very slow performance with my Presto 10G PCIe card or Twin10G Thunderbolt 10G adapter with OS X 10.11-10.12. | Dec-22-19 |
| In macOS 10.11 and 10.12, SMB signing is turned on by default. This is no problem for gigabit ethernet, but SMB Signing severely limits the performance of 10 gigabit ethernet. Apple has published a tech note how to turn off SMB signing: "Turn off packet signing for SMB 2 and SMB 3 connections". This note requires the use of the terminal application and a number of terminal commands, so some familiarity with those tools is required.
In macOS 10.13.6+, Apple has turned off SMB signing by default. |
| |
| |
