| ID | | Article Title | Post Date |
|
108 | 
| FireWire 800 ExpressCard/34 will not see a device on a MacBook Pro under Mac OS X Version 10.5+. | Dec-21-11 |
| The solution is to inactivate FireWire 800 as a network connection. To fix this issue, peform the following steps:
1) Open Network System Preference
2) Select PCI FireWire Slot ExpressCard
3) Open the "gear" pop-up menu and select Make Service Inactive
4) Click Apply |
| |
|
394 | 
| After waking from sleep, my Macintosh will give me a "Device Removal" error for a USB storage device. Why? | Aug-19-09 |
|
396 |
| What's the difference between the Tango FireWire 800/USB 2.0 Express, #FW8USB2-E; and Tango FireWire 800/USB 2.0 PCIe, #FW8USB2A-E? | Oct-12-09 |
|
712 |
| I own a LYNX Aurora 16VT with LT-USB-interface and I the sound is distorted when I connect to a Tango USB port in a Mac Pro. | Oct-10-12 |
|
817 |
| Storage connected to a USB 3 PCIe card (or Tango combo card) gives an macOS error message upon wake from sleep. | May-12-20 |
| To minimize power usage during sleep, power is removed from PCIe cards. Because of this power-saving specification, a USB 3 PCIe card is unable to maintain USB port power during sleep. In macOS, this result in a storage device disconnect upon wake from sleep. The storage device will automatically remount, but the system reports a disconnect message. Because macOS flushes all caches before sleeping, this disconnect should never result in any loss of data. |
| |
|
997 |
| I have installed my FireWire card in a Windows computer, but it is not working. What do I do? | Feb-10-18 |
| |
