| ID | | Article Title | Post Date |
|
108 | 
| FireWire 800 ExpressCard/34 will not see a device on a MacBook Pro under Mac OS X Version 10.5+. | Dec-21-11 |
| The solution is to inactivate FireWire 800 as a network connection. To fix this issue, peform the following steps:
1) Open Network System Preference
2) Select PCI FireWire Slot ExpressCard
3) Open the "gear" pop-up menu and select Make Service Inactive
4) Click Apply |
| |
|
430 |
| When do I need to supply power to the power connector on my PCI FireWire card? | Sep-29-09 |
| The PCI bus is specified to supply 12V @ 500mA, which is enough to power one bus-powered FireWire or FireWire 800 device. To power more than one bus-powered FireWire device, connect a cable from the internal power supply to the power connector on the FireWire card. The cards use either a standard floppy drive or ATA hard drive power connector. |
| |
| |
