| ID | | Article Title | Post Date |
|
756 | 
| Do the Sonnet USB 2.0 or USB 3 cards support the Apple SuperDrive? | Apr-02-22 |
|
759 |
| My bus-powered USB 3 drive or SSD will not reliably mount or transfer data. | Dec-14-19 |
|
817 | 
| Storage connected to a USB 3 PCIe card (or Tango combo card) gives an macOS error message upon wake from sleep. | May-12-20 |
| To minimize power usage during sleep, power is removed from PCIe cards. Because of this power-saving specification, a USB 3 PCIe card is unable to maintain USB port power during sleep. In macOS, this result in a storage device disconnect upon wake from sleep. The storage device will automatically remount, but the system reports a disconnect message. Because macOS flushes all caches before sleeping, this disconnect should never result in any loss of data. |
| |
|
933 |
| What versions of macOS support Allegro USB 3 cards? | Apr-02-22 |
|
956 |
| What generations of Thunderbolt chassis do Sonnet Allegro PCIe cards support? | Apr-02-22 |
|
971 |
| One or more of my ports has stopped working on my USB 3 card. | Aug-24-22 |
|
1080 |
| What is the difference between USB 3.0, 3.1 and 3.2? | Apr-02-22 |
| USB 3 is the specification revision published by the USB Implementers Forum. Dot 0, dot 1, or dot 2 is the revision level of the specification. USB 3.2 superseded USB 3.1, which superceded USB 3.0. Each version of the specification retained what was in the previous specification and added something new. USB 3.1 added 10Gbps. USB 3.2 adds 20Gbps.
Our cards have not changed. We have updated the naming on our web site to conform with the latest specification.
This chart may help...
USB 3.0____USB 3.1___________________USB 3.2________________
USB 3.0 -> USB 3.1 Gen 1 (5Gbps) --> USB 3.2 Gen 1 (5Gbps)
..................USB 3.1 Gen 2 (10Gbps) -> USB 3.2 Gen 2 (10Gbps)
.............................................................USB 3.2 Gen 2x2 (20Gbps) |
| |
|
1099 |
| What makes Sonnet USB 3.2 Cards more reliable than other USB 3 cards? | Apr-02-22 |
|
1144 |
| Why does Sonnet use only PCIe 2 to connect the two controllers on these 4-port USB 3.2 Gen 2 cards? | Apr-18-21 |
|
1149 |
| How to configure Linux to use Allegro Pro USB card models USB3C-4PM-E and USB3-PRO-4P10-E | May-04-21 |
|
1168 |
| If I put a usb 2.0 and 3.0 device on the same controller will the speeds for the 3.0 device drop to 2.0 like older split-port controllers? | Dec-07-21 |
| |
