Operating System Requirements: Windows 10 (64-bit), Windows 11 Description: SxS UDF Driver software enables reading of MXF files recorded in UDF mode on SxS memory card. [Note: This driver is not sufficient to support the computer communicating with the device. You must also install the SxS Device Driver.] Installation of these drivers enables the Sonnet SF3 Series SxS PRO X Card Reader, SF3 Series SxS Pro Card Reader, SxS PRO X Thunderbolt 3 Single Slot Reader, Echo ExpressCard Thunderbolt Adapter, Qio, and Qio E3. to support UDF files.
Download and install the latest UDF driver, and then restart your computer.
Sonnet has tested the following cards with the Drobo S:
Tempo SATA E2P..............................compatible
Tempo SATA E4P..............................not compatible
Tempo SATA ExpressCard/34...........compatible
Tempo SATA Edge ExpressCard/34...compatible
Tempo SATA Pro ExpressCard/34.....not compatible
Tempo SATA X4P..............................not compatible
Qio eSATA ports...............................not compatible
A battery should be capable of providing 12Volts @ 3 Amps and have an XLR 4-pin power connector. Nominal power usage of Qio is 9W, and attached F2s are 8 Watts each. An example of a compatible battery is the Bescor MM7XLR-NC (BC-500 charger sold separately) that can provide 12Volts @ 7.2Amps and has a 50 Watt-hour capacity. This battery could power a Qio for 5.5 hours, or a Qio plus F2 for 3 hours.