| ID | | Article Title | Post Date |
|
756 | 
| Do the Sonnet USB 2.0 or USB 3 cards support the Apple SuperDrive? | Apr-02-22 |
|
933 |
| What versions of macOS support Allegro USB 3 cards? | Apr-02-22 |
|
956 |
| What generations of Thunderbolt chassis do Sonnet Allegro PCIe cards support? | Apr-02-22 |
|
976 |
| In a Mac Pro, the SSDs are seen as external drives, how do I prevent accidental ejects? | Feb-14-23 |
|
992 |
| The write speed of my Samsung 830, 840, 840 EVO, 840 PRO, 850 EVO or 850 PRO has slowed to below 100MB/s. | Mar-30-20 |
|
1096 |
| Does the Fusion Dual 2.5" SSD support 15mm 2.5" SATA/SAS hard drives? | Mar-30-20 |
|
1097 |
| The Fusion Dual 2.5" SSD RAID PCIe card gives an macOS error message upon wake from sleep. | Mar-30-20 |
|
1099 | 
| What makes Sonnet USB 3.2 Cards more reliable than other USB 3 cards? | Apr-02-22 |
| The uniqueness of Sonnet USB 3.2 products is each USB port has a USB power switch (MOSFET) that manages and monitors the current flow of the USB port. The USB switch limits the current draw when a new USB device is connected minimizing the voltage droop of the main USB 5V power rail, thereby protecting devices connected to other USB ports from going offline because of port power droop. The USB switch is also a very effective current limiter that does not degrade over trips the way a resettable poly-fuse would. |
| |
|
1108 |
| If I want to make a RAID 0 configuration across two cards (four SSDs), how should I do it? | Aug-10-20 |
|
1109 |
| How do I detect and replace a failed SSD in RAID 1 mirror mode? | Aug-13-20 |
| A red ERR light will flash when an SSD has failed. It the top ERR flashes, the SSD in connector J2 (nearer to the PCIe bracket) needs to be replaced. It the bottom ERR flashes, the SSD in connector J1 (farther from the PCIe bracket) needs to be replaced.
Replacing a failed SSD
1. Shut down and remove card from your system.
2. Remove the faulted SSD and replace with a new SSD. The new SSD capacity must be equal to or greater than the original SSD. The rebuild process will wipe out any data on the replacement SSD.
3. Plug the card into your computer and boot.
4. The RAID will rebuild automatically. While the RAID is rebuilding, the green ACT LEDs of both SSDs will flash. It may take several hours to rebuild a RAID 1 array (a rule of thumb is an hour per TB). Do not shut down or sleep your computer during the rebuild process.
5. When the process is complete, the red ERR light will go out and both ACT LEDs will turn solid green. |
| |
|
1136 |
| How can I use my new SSD volume to hold my user folder on macOS? | Feb-14-23 |
| 1) Make a backup of the user folder
2) Copy the user folder to the SSD volume.
3) In System Preferences, open Users & Groups.
4) Unlock.
5) Right-Click on the user you moved to the SSD volume and select Advanced Options
6) Point the Home Directory to the user folder on the SSD volume. |
| |
|
1183 |
| The Write performance of my SSD is very slow under Windows. | Feb-14-23 |
| |
