ID | | Article Title | Post Date |
756 |
| Do the Sonnet USB 2.0 or USB 3 cards support the Apple SuperDrive? | Apr-02-22 |
| None of Sonnet's Cards with USB 2.0 or USB 3 (either Type A or Type C) ports support the Apple SuperDrive. You must use a built-in USB 2.0 or 3.0 port on your Mac.
According to http://support.apple.com/kb/HT5630, "The Apple USB SuperDrive is compatible with Mac models from 2008 and later that don't have a built-in optical drive." |
  |
933 |
| What versions of macOS support Allegro USB 3 cards? | Apr-02-22 |
956 |
| What generations of Thunderbolt chassis do Sonnet Allegro PCIe cards support? | Apr-02-22 |
| These cards are compatible with only Thunderbolt 2 or 3 PCIe expansion chassis; they are not compatible with Thunderbolt 1 PCIe expansion chassis (unless they have been upgraded to Thunderbolt 2). |
  |
976 |
| In a Mac Pro, the SSDs are seen as external drives, how do I prevent accidental ejects? | Feb-14-23 |
992 |
| The write speed of my Samsung 830, 840, 840 EVO, 840 PRO, 850 EVO or 850 PRO has slowed to below 100MB/s. | Mar-30-20 |
1096 |
| Does the Fusion Dual 2.5" SSD support 15mm 2.5" SATA/SAS hard drives? | Mar-30-20 |
1097 |
| The Fusion Dual 2.5" SSD RAID PCIe card gives an macOS error message upon wake from sleep. | Mar-30-20 |
| To minimize power usage during sleep, power is removed from PCIe cards. Because of this power-saving specification, the controller on the Fusion Dual 2.5" SSD RAID PCIe card is unable to maintain its port power during sleep. In macOS, this may result in the SSD RAID disconnecting upon waking from sleep. The SSD RAID will automatically remount, but the system reports a disconnect message. Because macOS flushes all caches before sleeping, this disconnect should never result in any loss of data. |
  |
1099 |
| What makes Sonnet USB 3.2 Cards more reliable than other USB 3 cards? | Apr-02-22 |
1108 |
| If I want to make a RAID 0 configuration across two cards (four SSDs), how should I do it? | Aug-10-20 |
| For the significantly better performance, make a hardware RAID 0 on each card, and software RAID 0 across the two cards. |
  |
1109 |
| How do I detect and replace a failed SSD in RAID 1 mirror mode? | Aug-13-20 |
1136 |
| How can I use my new SSD volume to hold my user folder on macOS? | Feb-14-23 |
1183 |
| The Write performance of my SSD is very slow under Windows. | Feb-14-23 |
  |