| ID | | Article Title | Post Date |
|
808 | 
| What 10GBase-T switches and PCIe cards has Sonnet tested for interoperability? | Dec-22-19 |
|
809 | 
| What reasonably-priced 10GBASE-T switches can Sonnet recommend? | Dec-22-19 |
| Sonnet has found the 10GBASE-T NETGEAR ProSAFE XS708E 8-port, and ProSAFE XS712T 12-Port 10-Gigabit Smart Switches to be a cost-effective, yet high-performance switches. They supports comprehensive networking features such as VLAN, QoS, IGMP and MLD snooping, L2+ Static Routing, Link Aggregation, ACL, and IPv6 management. The ProSAFE series has an easy-to-use web management GUI, and can be daisy-chained for expansion. |
| |
|
814 |
| I'm getting low throughput on macOS. How can I fix this? | May-26-22 |
|
993 |
| My system crashes, freezes, or fails to connect when I talk to a storage device on the network | May-13-22 |
| Go to System Preferences...Network.
Select the 10GbE port and click "Advanced..."
Select the Hardware tab.
If Jumbo packets are on, turn them off, click OK and click Apply.
If that fixes the problem, then stay at Standard (1500), or check the Jumbo packet setting of every switch and device in the path.
If that doesn't fix the problem, check Flow Control.
If Flow Control is off, turn it on; or if it is on, turn it off. Not all devices support flow control, or the absence of flow control. |
| |
|
1081 |
| I see the Solo10G in macOS, but it is not making a reliable network connection. | May-13-22 |
|
1123 |
| I upgraded macOS Big Sur to version 11.1, and my Solo10G stopped working. | May-13-22 |
| This update corrupts the network settings. To recover, you need to delete the network plists and recreate your network settings.
Launch Terminal and type the following:
sudo rm /Library/Preferences/SystemConfiguration/NetworkPreferences.plist
sudo rm /Library/Preferences/SystemConfiguration/preferences.plist
Restart and recreate your network settings.
If that doesn't work, contact support@sonnettech.com. Be sure to save and send a System Report. |
| |
| |
