| ID | | Article Title | Post Date |
|
814 | 
| I'm getting low throughput on macOS. How can I fix this? | May-26-22 |
|
976 |
| In a Mac Pro, the SSDs are seen as external drives, how do I prevent accidental ejects? | Feb-14-23 |
|
1069 |
| How do I configure RAID under Windows 10? | Feb-14-23 |
|
1073 |
| How do I configure RAID under macOS? | Feb-14-23 |
|
1077 |
| Programming SSDs to 4k Block Size for Compatibility With macOS 10.13.6 | Feb-08-23 |
|
1122 |
| Thunderbolt 3 NVMe volumes may experience a stop error under Windows 10 version 20H2 | Feb-14-23 |
|
1136 | 
| How can I use my new SSD volume to hold my user folder on macOS? | Feb-14-23 |
| 1) Make a backup of the user folder
2) Copy the user folder to the SSD volume.
3) In System Preferences, open Users & Groups.
4) Unlock.
5) Right-Click on the user you moved to the SSD volume and select Advanced Options
6) Point the Home Directory to the user folder on the SSD volume. |
| |
|
1183 |
| The Write performance of my SSD is very slow under Windows. | Feb-14-23 |
| The Windows default for any external storage media is for Write Caching policies to be disabled. If you have enabled it, then the write performance to an SSD will be very slow. To get significantly increase write performance, disable Write Caching. For instructions, see this Microsoft Document. |
| |
|
1189 |
| The x8 PCIe lanes can deliver up to 7.8 GB/s. How do you fit the RAID, the 10gig lan and the 2x USB 3.2 in this bandwidth? | Jun-08-22 |
| The most important design feature is that every device is connected at its maximum PCIe 3.0 lanes: each SSD@x4; USB 3.2@x2; and 10GbE@x2, which gives each device its maximum usable bandwidth: SSD@3.5 GB/s x2; USB 3.2@1.0 GB/s x2; and 10GbE@1.0GB/s. Adding up the total bandwidth is indeed greater than 7.8GB/s, but considering that PCIe input and output bandwidth are independent, one can achieve the full 11MB/s bandwidth of simultaneous use of the devices as long as there is a mix of reading and writing. It is extremely unlikely that one would need to use all the ports simultaneously, at full bandwidth, and all writing-or all reading. The alternative of a larger PCIe bridge chip to connect to the computer at x16 would have increased the cost of the McFiver, without any performance gain in virtually any practical use scenario. |
| |
| |
