![Encore/ST G4](https://www.sonnettech.com/product/images/tn_encorest_bnr.jpg)
|
Please click the arrow next to the category to expand or collapse: | ![](/support/kb/images/collapse.png) | Driver (2) | | ID | | Download Title | Download Link | Post Date |
153 |
| Encore Firmware Updater Installer (Mac OS X 10.3-10.4) | | May-08-19 | | Description: This software installs the Sonnet Firmware Updater and Sonnet Firmware Remover applications to your computer's Mac OS X Applications folder. Sonnet Firmware Updater installs the firmware patch necessary to support Encore/ZIF (700 MHz and faster) and various Encore/ST processor upgrade cards. Version 3.1 adds support for Power Macintosh G3 (Blue & White) and all Power Mac G4 computers.
Computers: Power Macintosh G3 (Blue & White) and Power Mac G4 (all models).
Note: Users running Mac OS X Version 10.5 should use version 3.2 of Encore Firmware Updater Installer (Mac OS X Version 10.5). | |
400 |
| Encore Firmware Updater Installer (Mac OS X 10.5) | | May-08-19 | | Description: This software installs the Sonnet Firmware Updater and Sonnet Firmware Remover applications to your computer's Mac OS X Applications folder. Sonnet Firmware Updater installs the firmware patch necessary to support various Encore/ST processor upgrade cards. Version 3.2 adds support for use in computers running versions of Mac OS X Version 10.5.
Computers: Power Mac G4 (all models except PCI Graphics).
Note: Users running Mac OS X Version 10.4 or 10.3 should use version 3.1 of Encore Firmware Updater Installer (Mac OS X). | | |
|
![](/support/kb/images/collapse.png) | FAQ (12) | | ID | | Article Title | Post Date |
72 |
| The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD. | May-12-09 | | Under certain conditions, the Crescendo/Encore Installer application encounters conflicts that cause it to hang, or even crash the computer when the computer is booted in Mac OS 9 with extensions on.
Solution:
1) If you have attempted to run the application directly from the Sonnet Installer CD, copy the Crescendo/Enc Ins file from the CD to the desktop (single-click and drag the file from the Mac OS 7-9 ONLY, not CLASSIC folder on to the desktop). Otherwise, go to step 2.
2) Restart the computer under Mac OS 9 with extensions off (hold down the Shift key when you turn on the computer until the message "Extensions Off" appears).
3) Launch the Crescendo/Encore Installer from the desktop and follow the instructions. | |
76 |
| Which current Encore/ST G4 processor upgrades include a pre-attached heat sink? | May-12-09 |
77 |
| I purchased an Encore/ST G4 processor upgrade that is just a card; is it less reliable than one with a pre-attached heat sink? | May-12-09 |
169 |
| May I discard my original CPU after installing Sonnet's upgrade cards?
| May-07-09 |
171 |
| The speed indicated on the G3 or G4 chip on my Sonnet processor upgrade doesn't seem to match the speed of the upgrade I purchased. What's the story? | May-07-09 |
175 |
| The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD while using Mac OS 9. | May-07-09 |
176 |
| Sonnet OS X Installer Instructions | May-07-09 |
204 |
| Mac OS 10.5 "Leopard" shuts down a few seconds into booting after a new installation of the OS. | May-07-09 |
218 |
| The computer's standard startup process takes noticeably longer after upgrading to any Mac OS 9.x system from Mac OS 8.6 or earlier. | May-12-09 |
235 |
| After installing the Encore/ST G4 upgrade card, its speed is reported incorrectly. This occurs using Apple System Profiler (ASP), as well as other third party reporting utilities such as Xbench, Tech Tool, and others. | May-12-09 |
236 |
| After installing an Encore/ST G4 processor upgrade into my Power Mac G4 computer or upgrading to Final Cut Pro 4.0 (or later), a message stating, �The required hardware could not be found,� appears when I attempt to launch the application. | May-12-09 |
237 |
| After installing an Encore/ST processor card into my computer, it won't boot or it is very unstable. | Aug-06-09 | |
|
|
|