| ID | | Article Title | Post Date |
|
196 | 
| Why should users only first eject the adapter and then put the CFs into the slots? | Jun-22-09 |
| One should insert CF cards into the slots only when the adapter card is ejected because the interface to CF cards is ATA and ATA can only instantiate itself to the system when the adapter card is inserted. You can unmount and then remove CF cards when the adapter is inserted, but you can't plug in new ones unless you first power off and eject the adapter card. |
| |
|
197 |
| Is it possible to take out just one Compact Flash card and work with the other? | Jun-22-09 |
| One can unmount and remove one CF card and still access the other CF card. However, the adapter must be powered off and ejected to insert a CF card.
|
| |
|
198 | 
| In the side bar of the Mac OS X Finder I sometimes don't get an eject button for a Compact Flash card. | Feb-08-10 |
|
200 |
| I created a RAID 0 out of two Compact Flash cards and it seem no faster than one card. Why? | Jun-22-09 |
|
215 |
| Does Nikon Transfer software support the Sonnet Compact Flash Adapter? | Feb-08-10 |
|
494 |
| I'm having trouble reading two SanDisk Extremes or Extreme Pros, or the system is asking me to format an already-formatted card. Why? | Mar-24-10 |
|
545 |
| Is the Sonnet Pro Dual CompactFlash Adapter compatible with Camera Bits "Photo Mechanic"? | Dec-26-10 |
| The Sonnet Dual CF adapter works beautifully! You can use and see both slots and transfer with the Photo Mechanic software as you would expect. |
| |
|
628 |
| Why doesn't my Sonnet ExpressCard/34 card work in the Echo ExpressCard/34 Thunderbolt Adapter? It's listed as compatible! | Aug-11-17 |
|
650 |
| Does the Pro Dual CompactFlash Adapter support UDMA 7 CompactFlash cards? | Mar-27-12 |
|
708 |
| I cannot read 64GB or 128GB CF cards in Windows | Jan-07-14 |
|
778 |
| I have a 17" MacBook Pro 6,1 and my ExpressCard does not work after upgrading to Mavericks. | Dec-30-13 |
|
832 |
| Qio with PCIe interface Windows has a compatibility issue with the SuperMicro X10DAi. | Mar-24-15 |
|
928 |
| My Qio is not recognizing SxS cards on Windows. | Jul-05-18 |
| Your computer may not be fully supported by the Qio BIOS. If you boot with SxS cards inserted into the Qio, it forces allocation of the busses and memory space needed. Some computers will refuse to allocated bus space for later insertion unless two SxS cards are inserted before booting.
If you are having hot plug issues, not basic SxS functionality, you can use CFScan utility to force the Qio to "see" a newly inserted device. |
| |
| |
