| Please click the arrow next to the category to expand or collapse: |
 | Driver (0) | | | | No Driver was found for product. | | | 
| Firmware (0) | | Manual (1) | | | ID | | Download Title | Download Link | Post Date |
|
250 | 
| Allegro Express FW400, Allegro Express USB 2.0, Allegro FW400 PCIe, Allegro FW800 PCIe, Allegro USB PCIe, Tango Express FireWire/USB 2.0, Tango Express FireWire 800/USB 2.0, Tango 800 PCIe, and Tango PCIe Quick Start Guide | | May-08-19 | | Instructions for installing a Sonnet Allegro Express FW400, Allegro Express USB 2.0, Allegro FW400 PCIe, Allegro FW800 PCIe, Allegro USB PCIe, Tango Express FireWire/USB 2.0, Tango Express FireWire 800/USB 2.0, Tango 800 PCIe, or Tango PCIe adapter card into a supported Mac or Windows computer. | | | | |
| | FAQ (3) | | | ID | | Article Title | Post Date |
|
394 | 
| After waking from sleep, my Macintosh will give me a "Device Removal" error for a USB storage device. Why? | Aug-19-09 |
|
817 |
| Storage connected to a USB 3 PCIe card (or Tango combo card) gives an macOS error message upon wake from sleep. | May-12-20 |
|
997 |
| I have installed my FireWire card in a Windows computer, but it is not working. What do I do? | Feb-10-18 | | If the FireWire card doesn't function after it has been physically installed in the computer, try the legacy FireWire driver. To install the legacy driver, complete the following:
Press the Windows key + R.
Enter devmgmt.msc.
Click OK.
In Device Manager, expand IEEE 1394 Bus host controllers.
Right-click on 1394 OHCI Compliant Host Controller.
Click Update Driver Software.
Click Browse my computer for driver software.
Click Let me pick from a list of device drivers on my computer.
Click 1394 OHCI Compliant Host Controller (Legacy).
Click Next.
When Windows has finished installing the driver, click Close. | | | | |
|
|
|
