| Please click the arrow next to the category to expand or collapse: |
 | Driver (0) | | | | No Driver was found for product. | | | 
| Firmware (0) | | Manual (1) | | | ID | | Download Title | Download Link | Post Date |
|
250 | 
| Allegro Express FW400, Allegro Express USB 2.0, Allegro FW400 PCIe, Allegro FW800 PCIe, Allegro USB PCIe, Tango Express FireWire/USB 2.0, Tango Express FireWire 800/USB 2.0, Tango 800 PCIe, and Tango PCIe Quick Start Guide | | May-08-19 | | Instructions for installing a Sonnet Allegro Express FW400, Allegro Express USB 2.0, Allegro FW400 PCIe, Allegro FW800 PCIe, Allegro USB PCIe, Tango Express FireWire/USB 2.0, Tango Express FireWire 800/USB 2.0, Tango 800 PCIe, or Tango PCIe adapter card into a supported Mac or Windows computer. | | | | |
| | FAQ (3) | | | ID | | Article Title | Post Date |
|
394 | 
| After waking from sleep, my Macintosh will give me a "Device Removal" error for a USB storage device. Why? | Aug-19-09 |
|
817 |
| Storage connected to a USB 3 PCIe card (or Tango combo card) gives an macOS error message upon wake from sleep. | May-12-20 | | To minimize power usage during sleep, power is removed from PCIe cards. Because of this power-saving specification, a USB 3 PCIe card is unable to maintain USB port power during sleep. In macOS, this result in a storage device disconnect upon wake from sleep. The storage device will automatically remount, but the system reports a disconnect message. Because macOS flushes all caches before sleeping, this disconnect should never result in any loss of data. | | |
|
997 |
| I have installed my FireWire card in a Windows computer, but it is not working. What do I do? | Feb-10-18 | | |
|
|
|
