Encore/ST G4
Please click the arrow next to the category to expand or collapse:
Driver (2)
IDDownload TitleDownload LinkPost Date
153 Encore Firmware Updater Installer (Mac OS X 10.3-10.4)
Download Now
May-08-19
400 Encore Firmware Updater Installer (Mac OS X 10.5)
Download Now
May-08-19
 
Firmware (0)
Manual (3)
IDDownload TitleDownload LinkPost Date
159 Encore/ST G4 1.8 Ghz Processor Upgrade Card User's Guide
Download Now
May-08-19
267 Encore/ST G4 (1.4 GHz and Slower) Processor Ugrade Card User's Guide
Download Now
May-08-19
268 Encore/ST G4 (With No Heatsink) Processor Upgrade Card User's Guide
Download Now
May-08-19
Installation instructions for installing the Encore/ST G4 (with no heatsink) Processor Upgrade Card into a supported Power Mac G4 (AGP Graphics) computer.
 
 
FAQ (12)
IDArticle TitlePost Date
72 The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD.May-12-09
76 Which current Encore/ST G4 processor upgrades include a pre-attached heat sink?May-12-09
All models in the Encore/ST G4 line made today, except for those with a part number that starts with SG4-C, include a pre-attached heat sink. Products with a part number that starts with SG4-C are for use only in Power Mac G4 Cube, and do not include a pre-attached heat sink.
 
77 I purchased an Encore/ST G4 processor upgrade that is just a card; is it less reliable than one with a pre-attached heat sink?May-12-09
169 May I discard my original CPU after installing Sonnet's upgrade cards? May-07-09
171 The speed indicated on the G3 or G4 chip on my Sonnet processor upgrade doesn't seem to match the speed of the upgrade I purchased. What's the story?May-07-09
175 The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD while using Mac OS 9.May-07-09
176 Sonnet OS X Installer InstructionsMay-07-09
204 Mac OS 10.5 "Leopard" shuts down a few seconds into booting after a new installation of the OS.May-07-09
218 The computer's standard startup process takes noticeably longer after upgrading to any Mac OS 9.x system from Mac OS 8.6 or earlier.May-12-09
235 After installing the Encore/ST G4 upgrade card, its speed is reported incorrectly. This occurs using Apple System Profiler (ASP), as well as other third party reporting utilities such as Xbench, Tech Tool, and others.May-12-09
236 After installing an Encore/ST G4 processor upgrade into my Power Mac G4 computer or upgrading to Final Cut Pro 4.0 (or later), a message stating, “The required hardware could not be found,” appears when I attempt to launch the application.May-12-09
237 After installing an Encore/ST processor card into my computer, it won't boot or it is very unstable.Aug-06-09