Tempo-X SATA 4+4
Please click the arrow next to the category to expand or collapse:
Driver (2)
Firmware (0)
Manual (2)
FAQ (16)
IDArticle TitlePost Date
27 How can I distinguish between the earlier Tempo-X eSATA (4+4 and 8e) products supporting 3 Gigabit/sec speeds and the older cards that support 1.5 Gigabit/sec speeds?May-07-09
You can check your Macintosh System Profile. When you select the installed eSATA card, the Device ID will show either "0x6081" or "0x5081". The 3 Gigabit/second eSATA cards use the Marvell chip 88SX6081. The 1.5 Gigabit/second eSATA cards use the Marvell chip 88SX5081.
 
36 What are the benefits of supporting Spread Spectrum Clocking (SSC)?Mar-02-10
37 Is it possible to boot from a volume that resides on the Tempo SATA card?Mar-02-10
39 Can I hot-swap a disk drive that is attached to any Sonnet Tempo Serial ATA card?Mar-23-10
42 Can the Tempo SATA cards co-exist with other manufacturers' Serial ATA cards?Oct-27-09
44 How can I distinguish between the earlier Tempo-X eSATA products supporting 3 Gigabit speeds and the older cards that supported 1.5 Gb speeds?May-07-09
63 Can I operate two Tempo SATA cards in the same system?Sep-02-09
67 What kind of performance can I expect from a using a Sonnet Tempo SATA Card in a PCI slot (like in a Power Mac G4)?Oct-12-09
174 Drive(s) connected to the Tempo-X SATA 4+4 occasionally do not appear when the computer is booted or an error message regarding the RAID array connected to the Tempo-X SATA 4+4 is occasionally displayed at boot up, and the RAID array cannot be used.May-07-09
A very small number of Tempo-X SATA 4+4 users have reported a condition in which connected drives installed in an external case intermittently do not appear when their computer is booted.

To address this issue, update the Tempo-X SATA 4+4 card's firmware to version 1.0.1 or later by downloading and running the latest Tempo-X firmware updater.
 
219 With a Tempo-X SATA host controller installed and drives connected, the computer locks up and will not respond to keyboard or mouse input, and must be forced to power off (press and hold the power button for more than 5 seconds) then restarted.May-07-09
220 Multiple Hitachi hard drives connected to a Tempo-X SATA host controller are not always detected (won't mount).May-07-09
404 The Sonnet Tempo SATA card does not work with my Western Digital My Book Premium ES Edition, or Seagate Technology FreeAgent Pro.Mar-02-10
452 I upgraded my Tempo SATA software in a PowerMac G4 or G5 and the card is giving a lot of system errors.Oct-12-09
This does not happen often, but sometimes the driver caches do not get purged and the new SATA driver does not get loaded correctly from ROM.

Try this:
1) Delete and empty trash for the following file and two directories:
/System/Library/Extensions.mkext (a file)
/System/Library/Caches/com.apple.kernelcaches (a directory)
/System/Library/Caches/com.apple.romextensions (a directory)

2) Restart
 
454 I have connected a large hardware RAID volume (for example, a 4TB Fusion D400QR5) to a Sonnet Pro SATA card in a Macintosh, and it is showing up as only 2TB. Why?Oct-14-09
459 The performance of my drive array is significantly less than I expect.Jun-14-11
544 How do I uninstall the Sonnet Pro SATA Driver?Dec-26-10
Locate the SonnetSATA.kext file and delete it.