| ID | | Article Title | Post Date |
|
27 | 
| How can I distinguish between the earlier Tempo-X eSATA (4+4 and 8e) products supporting 3 Gigabit/sec speeds and the older cards that support 1.5 Gigabit/sec speeds? | May-07-09 |
|
36 |
| What are the benefits of supporting Spread Spectrum Clocking (SSC)? | Mar-02-10 |
|
37 | 
| Is it possible to boot from a volume that resides on the Tempo SATA card? | Mar-02-10 |
| Macintosh bootable volumes are supported on the internal 2-port PCI card (part number TSATA) but are not supported on any of the other SATA cards at this time.
|
| |
|
39 |
| Can I hot-swap a disk drive that is attached to any Sonnet Tempo Serial ATA card? | Mar-23-10 |
|
42 |
| Can the Tempo SATA cards co-exist with other manufacturers' Serial ATA cards? | Oct-27-09 |
|
44 |
| How can I distinguish between the earlier Tempo-X eSATA products supporting 3 Gigabit speeds and the older cards that supported 1.5 Gb speeds? | May-07-09 |
|
63 |
| Can I operate two Tempo SATA cards in the same system? | Sep-02-09 |
| Yes, this is a great way to expand capacity and performance. If two or more Tempo-X, X4+4, X8, X4i, X4P, E4i, or E4P cards are installed to the same machine they must all have the same firmware version to avoid conflicts. |
| |
|
67 |
| What kind of performance can I expect from a using a Sonnet Tempo SATA Card in a PCI slot (like in a Power Mac G4)? | Oct-12-09 |
|
174 |
| Drive(s) connected to the Tempo-X SATA 4+4 occasionally do not appear when the computer is booted or an error message regarding the RAID array connected to the Tempo-X SATA 4+4 is occasionally displayed at boot up, and the RAID array cannot be used. | May-07-09 |
|
219 |
| With a Tempo-X SATA host controller installed and drives connected, the computer locks up and will not respond to keyboard or mouse input, and must be forced to power off (press and hold the power button for more than 5 seconds) then restarted. | May-07-09 |
|
220 |
| Multiple Hitachi hard drives connected to a Tempo-X SATA host controller are not always detected (won't mount). | May-07-09 |
|
404 |
| The Sonnet Tempo SATA card does not work with my Western Digital My Book Premium ES Edition, or Seagate Technology FreeAgent Pro. | Mar-02-10 |
|
452 |
| I upgraded my Tempo SATA software in a PowerMac G4 or G5 and the card is giving a lot of system errors. | Oct-12-09 |
|
454 |
| I have connected a large hardware RAID volume (for example, a 4TB Fusion D400QR5) to a Sonnet Pro SATA card in a Macintosh, and it is showing up as only 2TB. Why? | Oct-14-09 |
| Under Mac OS X 10.3 and 10.4, a volume greater than 2TB will show as a 2TB volume due to a limitation in Apple's ATA layer (just above the driver). Sonnet plans to provide a 10.4 fix in the next driver release. Under Mac OS X 10.5 and 10.6, the full capacity of the RAID volume is available. |
| |
|
459 |
| The performance of my drive array is significantly less than I expect. | Jun-14-11 |
|
544 |
| How do I uninstall the Sonnet Pro SATA Driver? | Dec-26-10 |
| Locate the SonnetSATA.kext file and delete it. |
| |
| |
