Fusion DX800RAID
Please click the arrow next to the category to expand or collapse:
Driver (9)
IDDownload TitleDownload LinkPost Date
379 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X 10.6.8-10.8.5) 4.07Oct-17-2012
Operating System Requirements: Mac OS X 10.6+, Mac OS X Server 10.6+
Description: This software includes the latest flash bundle (v2012_05_21), driver (v4.01), and Configuration Tool (v4.07) software for the R380 RAID controller card included with Fusion D400RAID, D800RAID, DX800RAID, R800RAID, and RX1600RAID (part number FUS-RX16SR-xxTB) storage systems.

Release Notes:
• This flash bundle release fixes an issue where the ConfigTool application would not save NVRAM settings, fixes an issue where the ConfigTool application would incorrectly warn that NVRAM settings were not saved, and fixes a cryptic "HBA Internal Error" message displayed during an attempted rebuild of an invalid RAID group.
• This driver release updates the fan controller daemon for improved operation, and updates the memory allocation for x64 platforms for compatibility with OS X 10.8.2 and later. This driver installer has been updated to support GateKeeper for OS X 10.8 (Mountain Lion).
• This Configuration Tool release adds OS X 10.8 (Mountain Lion) support.

Important Note: Update the Sonnet RAID controller with the latest version of the firmware before installing the operating system driver. Use the latest version of the Configuration Tool application to make these updates.
 
380 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Windows) 4.07Oct-11-2012
408 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Linux)May-08-19
492 Sonnet Pseudo Drivers for SAS Expanders embedded in Sonnet DX800RAID and RX1600RAID (Windows XP and Vista) 1.0.1Feb-11-2010
531 Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (macOS) 3.76
532 Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (Windows) 2.75
533 Sonnet 6Gb/s SAS/SATA RAID (R680) Controller Software (Linux)Nov-06-17
716 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X Versions 10.4.11 through 10.5.8) 3.38Oct-18-2011
1008 Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Config Tool (macOS) 4.27Mar-09-2018
 
Firmware (0)
No Firmware was found for product.
 
Manual (5)
FAQ (10)
IDArticle TitlePost Date
91 Installation of the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro with a Fusion D800RAID, R800RAID, or D400RAID storage system.May-12-09
202 Under Mac OS X 10.5.6, the PCI Express Expansion Slot Utility (early Mac Pro) always reports 8x, 1x, 1x, 16x no matter how its set.May-06-09
301 Formatting a drive array greater than 16TB with APT (Apple Partition Table) fails in a Macintosh.Jun-16-09
302 I connected two Fusion DX800 (RX1600) RAIDs to the same controller, but only one show up to the ATTO configuration tool and the OS.May-20-09
387 How do I replace a failed drive under warranty if I'm in a sensitive/classified environment and can't send the old one back?Mar-23-10
445 What is the default drive timeout in Fusion RAID systems? Should I change it?Mar-24-10
450 My storage shows 10% more capacity under OS X 10.6 than under OS X 10.5. Why?Mar-24-10
737 I daisy-chained two DX800s and my drives don't show up.Mar-08-18
Sonnet DX800 had 3Gb SAS expanders (Model Number SON005 and previous) and some had 6Gb SAS expanders (Model Number SON0011 and later).

You may mix models if you connect one to each SAS controller port. You may daisy-chain units togerther of the same model in any order, but if you daisy-chain mixed models SON005 and SON0011, then model(s) SON005 must come earlier and model(s) SON0011 must come later in the daisy-chain.

The performance does not change much with the faster SAS expanders when you use only 8 drives, because the 8 lanes on the controller card connect directly to 8 drives in one chassis without SAS switching. However, the performance is measurable better with 6Gb over 3Gb SAS expanders when you connect two 6Gb units concurrently or daisy-chain 6Gb chassis. In order to raffect this performance increase, Sonnet phased in 6Gb internal SAS expanders. A consequence of this performance bump is that a 3Gb expander will not work behind the 6Gb expander in a chain, only the in front of it. A mixed configuration works as well as two 3Gb SAS expander chassis together. Unfortunately, the SAS expanders in the SON005 units cannot be upgraded because the backplane going to SON0011 changed also. The good news is that every valid configuration will generally run faster, and in no case slower than before.
 
775 Does the ATTO R380 Support OS X 10.9 (Mavericks)?Oct-21-13
955 Can I use Seagate Iron Wolf drives; or Hitchai and WD drives 8TB and larger?May-31-18