|
Please click the arrow next to the category to expand or collapse: | | Driver (9) | | ID | | Download Title | Download Link | Post Date |
379 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X 10.6.8-10.8.5) 4.07 | | Oct-17-2012 |
380 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Windows) 4.07 | | Oct-11-2012 | | Operating System Requirements: Windows XP (32-bit), Windows XP (64-bit), Windows Vista (32-bit), Windows Vista (64-bit), Windows 7 (32-bit), Windows 7 (64-bit), Windows Server 2003 (32-bit), Windows Server 2003 (64-bit), Windows Server 2008 (32-bit), Windows Server 2008 (64-bit) Description: This software includes the latest flash bundle (v2012_05_21), driver (v3.70), and Configuration Tool (v4.07) software for the R380 RAID controller card included with Fusion D400RAID, D800RAID, DX800RAID, R800RAID, and RX1600RAID (part number FUS-RX16SR-xxTB) storage systems.
Release Notes:
• This flash bundle release fixes an issue where the ConfigTool application would not save NVRAM settings, fixes an issue where the ConfigTool application would incorrectly warn that NVRAM settings were not saved, and fixes a cryptic "HBA Internal Error" message displayed during an attempted rebuild of an invalid RAID group.
• This driver release is the latest driver available.
• This Configuration Tool release adds support for time-stamped log messages from a RAID device.
Note: Update the Sonnet RAID controller with the latest version of the firmware before installing the operating system driver. Use the latest version of the Configuration Tool application to make these updates.
| |
408 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Linux) | | May-08-19 | | Description: This software includes the latest flash bundle (v2012_05_21), driver (v3.70), and Configuration Tool (v4.07) software for the R380 RAID controller card included with Fusion D400RAID, D800RAID, DX800RAID, R800RAID, and RX1600RAID (part number FUS-RX16SR-xxTB) storage systems.
Release Notes:
• This flash This flash bundle release fixes an issue where the ConfigTool application would not save NVRAM settings, fixes an issue where the ConfigTool application would incorrectly warn that NVRAM settings were not saved, and fixes a cryptic "HBA Internal Error" message displayed during an attempted rebuild of an invalid RAID group.
• This driver release is the latest driver available.
• This Configuration Tool release adds support for time-stamped log messages from a RAID device.
Note: Update the Sonnet RAID controller with the latest version of the firmware before installing the operating system driver. Use the latest version of the Configuration Tool application to make these updates.
| |
492 |
| Sonnet Pseudo Drivers for SAS Expanders embedded in Sonnet DX800RAID and RX1600RAID (Windows XP and Vista) 1.0.1 | | Feb-11-2010 |
531 |
| Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (macOS) 3.76 | | |
532 |
| Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (Windows) 2.75 | | |
533 |
| Sonnet 6Gb/s SAS/SATA RAID (R680) Controller Software (Linux) | | Nov-06-17 |
716 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X Versions 10.4.11 through 10.5.8) 3.38 | | Oct-18-2011 |
1008 |
| Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Config Tool (macOS) 4.27 | | Mar-09-2018 | |
|
| FAQ (10) | | ID | | Article Title | Post Date |
91 |
| Installation of the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro with a Fusion D800RAID, R800RAID, or D400RAID storage system. | May-12-09 |
202 |
| Under Mac OS X 10.5.6, the PCI Express Expansion Slot Utility (early Mac Pro) always reports 8x, 1x, 1x, 16x no matter how its set. | May-06-09 |
301 |
| Formatting a drive array greater than 16TB with APT (Apple Partition Table) fails in a Macintosh. | Jun-16-09 |
302 |
| I connected two Fusion DX800 (RX1600) RAIDs to the same controller, but only one show up to the ATTO configuration tool and the OS. | May-20-09 |
387 |
| How do I replace a failed drive under warranty if I'm in a sensitive/classified environment and can't send the old one back? | Mar-23-10 |
445 |
| What is the default drive timeout in Fusion RAID systems? Should I change it? | Mar-24-10 | | The default drive timeout Fusion RAID systems is 30 seconds. The default is generally the best, but may be insufficient for some Seagate drives, which in rare instances may not respond within a 30 second timeout and consequently appear as degraded. If you are using Seagate drives, Sonnet recommends setting the timeout to 60 seconds, with the CLI command, "set raidcommandtimeout 60000". | |
450 |
| My storage shows 10% more capacity under OS X 10.6 than under OS X 10.5. Why? | Mar-24-10 |
737 |
| I daisy-chained two DX800s and my drives don't show up. | Mar-08-18 |
775 |
| Does the ATTO R380 Support OS X 10.9 (Mavericks)? | Oct-21-13 |
955 |
| Can I use Seagate Iron Wolf drives; or Hitchai and WD drives 8TB and larger? | May-31-18 | |
|
|
|