| ID | | Article Title | Post Date |
|
91 | 
| Installation of the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro with a Fusion D800RAID, R800RAID, or D400RAID storage system. | May-12-09 |
|
98 |
| ATTO R380 RAID Software (Feb. 2008) | Aug-05-09 |
|
101 |
| Fusion storage system activity lights are always on with Seagate ES.2 (Enterprise) drives installed in the drive bays. | Oct-22-10 |
|
202 |
| Under Mac OS X 10.5.6, the PCI Express Expansion Slot Utility (early Mac Pro) always reports 8x, 1x, 1x, 16x no matter how its set. | May-06-09 |
|
387 | 
| How do I replace a failed drive under warranty if I'm in a sensitive/classified environment and can't send the old one back? | Mar-23-10 |
| Seagate has a provisions in place to deal with replacing drives in sensitive / classified environments.
1. Start by going to the Seagate Warranty Validation page http://support.seagate.com/customer/warranty_validation.jsp
2. Input all the neccessary drive information and continue until you are issued an RMA or return#.
3. Contact Seagate at http://www.seagate.com/www/en-us/about/contact_us to request a "Certificate Of Destruction". Seagate will send the COD via e-mail along with instructions on how to destroy the drive to their satisfaction. Certain parts of the drive will need to be shipped back to Seagate along with a filled out copy of the COD.
4. Once Seagate receives the COD and associated drive parts meeting their requirements, a replacement drive(s) will be shipped to the address set forth in the RMA. |
| |
|
445 |
| What is the default drive timeout in Fusion RAID systems? Should I change it? | Mar-24-10 |
| The default drive timeout Fusion RAID systems is 30 seconds. The default is generally the best, but may be insufficient for some Seagate drives, which in rare instances may not respond within a 30 second timeout and consequently appear as degraded. If you are using Seagate drives, Sonnet recommends setting the timeout to 60 seconds, with the CLI command, "set raidcommandtimeout 60000". |
| |
|
450 |
| My storage shows 10% more capacity under OS X 10.6 than under OS X 10.5. Why? | Mar-24-10 |
|
822 |
| What hard drives does Sonnet recommend for 4-drive desktop systems? | Nov-05-15 |
| In addition to specific drives that Sonnet has qualified, Sonnet recommends using hard disk drives that are qualified by the manufacturer for desktop NAS systems.
Drive Family Enterprise Warranty RPM Cache Rotational Reference
(years) (MB) Vibration
Compensation
HGST Deskstar NAS 3 7200 64-128 Yes www.hgst.com/hard-drives/internal-drive-kits/nas-desktop-drive-kit
HGST Ultrastar \u8730 5 7200 64 Yes www.hgst.com/hard-drives/internal-drive-kits/performance-drive-kits
Seagate NAS HDD 3 5900 64 (1) www.seagate.com/products/network-attached-storage/nas-drives/
Seagate Enterprise NAS \u8730 5 7200 128-256 Yes www.seagate.com/products/network-attached-storage/nas-drives/
Seagate Enterprise Cap. \u8730 5 7200 128-256 Yes www.seagate.com/products/network-attached-storage/nas-drives/
Toshiba Sonace I \u8730 3 7200 64 Yes toshiba.semicon-storage.com/ap-en/product/storage-products/specialty/md03acaxxxv.html
Toshiba Sonance II \u8730 3 5400 128 Yes toshiba.semicon-storage.com/ap-en/product/storage-products/specialty/md04abaxxxv.html
WD Red 3 5400 16-64 (2) www.wdc.com/en/products/internal/nas/
WD Red Pro 5 7200 64-128 Yes www.wdc.com/en/products/internal/nas/
WD Re \u8730 5 7200 32-128 Yes www.wdc.com/en/products/internal/nas/
(1) Rotational Vibration Tolerance
(2) 3D Active Balance Plus |
| |
| |
