| ID | | Article Title | Post Date |
|
36 | 
| What are the benefits of supporting Spread Spectrum Clocking (SSC)? | Mar-02-10 |
|
37 |
| Is it possible to boot from a volume that resides on the Tempo SATA card? | Mar-02-10 |
|
39 |
| Can I hot-swap a disk drive that is attached to any Sonnet Tempo Serial ATA card? | Mar-23-10 |
|
40 | 
| How does hot-swap functionality work? | Mar-02-10 |
| Hot-swap functionality enables you to connect and disconnect drives without having to power down your computer. This does not mean you can simply pull out a drive at any time; you must put away ("eject", "unmount", "dismount") the drive volume. For Mac OS X users, simply drag the drive icon associated with the drive(s) you wish to remove to the eject icon on the dock; Windows users using a Tempo SATA ExpressCard/34 may left-click on the eject icon in the taskbar for the drive they wish to eject. Only after the drives are ejected (unmounted) is it safe for you to disconnect the drives or cables. If you do not follow this procedure, data on your drives may become corrupted. |
| |
|
42 |
| Can the Tempo SATA cards co-exist with other manufacturers' Serial ATA cards? | Oct-27-09 |
|
43 |
| Can I operate a Sonnet PCIe (x4) card in a PCIe x8 or x16 slot? | Mar-02-10 |
|
63 |
| Can I operate two Tempo SATA cards in the same system? | Sep-02-09 |
|
87 |
| I cannot get the Tempo SATA E4P to install properly under Windows Home Server. | Sep-02-09 |
|
103 |
| Tempo SATA E4P not recognized in a Mac Pro. | Sep-02-09 |
|
106 |
| Is Tempo SATA E4P, E4i, X4P, or X4i compatible with Red Hat Linux? | Sep-02-09 |
|
120 |
| How do I set up a RAID 0 striped array under Windows XP Professional or Vista? | Mar-23-10 |
|
121 |
| Can I set up a RAID 1 mirrored array under Windows XP or Vista? | Mar-23-10 |
|
404 |
| The Sonnet Tempo SATA card does not work with my Western Digital My Book Premium ES Edition, or Seagate Technology FreeAgent Pro. | Mar-02-10 |
| Sonnet Tempo cards are compatible with most external SATA storage. However, external hard drives with USB 2.0/eSATA dual interface based on the Oxford Semiconductor OXU931DS storage controller chip may not be compatible with Mac OS X when connected via SATA. Known issues are kernel panics occurring when the drive is connected, or the drive not being recognized by the operating system.
Summary of eSATA storage
- Storage with eSATA alone.......................................................compatible
- Storage with Triple interfaces.................................................compatible
- Storage with Quad interfaces..................................................compatible
- Storage with eSATA plus Firewire 400 and/or 800..................compatible
- Storage with port multiplier support (multiple drives).............compatible
- Storage with RAID 0, 1, or 5 (multiple drives)..........................compatible
- Storage with eSATA plus USB (based on JMicron 20366)..........compatible
these compatible drives include, but are not limited to:
1) OWC Mercury On-the-Go USB 2.0/eSATA 2.5" portable
- Storage with eSATA plus USB (based on Oxford OXU931DS)....not compatible
these incompatible drives include, but are not limited to:
1) Western Digital My Book Premium ES Edition
2) Seagate Technology FreeAgent Pro |
| |
|
452 |
| I upgraded my Tempo SATA software in a PowerMac G4 or G5 and the card is giving a lot of system errors. | Oct-12-09 |
|
454 |
| I have connected a large hardware RAID volume (for example, a 4TB Fusion D400QR5) to a Sonnet Pro SATA card in a Macintosh, and it is showing up as only 2TB. Why? | Oct-14-09 |
|
459 |
| The performance of my drive array is significantly less than I expect. | Jun-14-11 |
|
491 |
| Are Sonnet Tempo SATA cards compatible with the Drobo S? | Feb-02-11 |
|
544 |
| How do I uninstall the Sonnet Pro SATA Driver? | Dec-26-10 |
|
653 |
| I connected a Red Station media reader to the eSATA ports, but the media would not mount. How do I mount the media? | May-06-13 |
| Mac OS 10.7.5 will not mount FAT32 volumes connected to the eSATA ports of this device. (FAT32 volumes mount fine in 10.6.8 and in 10.8.2 and later.)
As a workaround, you can manually mount volumes with the following procedure:
1) Open terminal (Applications > Utilities > Terminal)
2) Run the following command:
diskutil list
Look for the target volume in the IDENTIFIER column. The volume will have a name like disk4s2.
3) Create a mount point by using the following terminal command:
mkdir /Volumes/myvolume
Note: myvolume is the name of the mount point you will create and must be unique - for example, you cannot mkdir /Volumes/FAT if a volume named FAT is already mounted.
4) Mount the target volume with the command:
sudo mount -t msdos /dev/disk4s2 /Volumes/myvolume
Note: disk4s2 is the from the IDENTIFIER column from step 2. myvolume is the unique name you chose in step 3.
The volume should now be mounted and is available for use. The volume must also be unmounted through terminal - finder will not be able to unmount the volume.
The command to unmount the volume is:
sudo umount /Volumes/myvolume
where myvolume is the mount point you created in step 3. |
| |
|
659 |
| eSATA drives won't mount after updating to OS X 10.7.4 | Jun-22-12 |
|
972 |
| After I upgraded macOS, the Twin10G, Presto 10GbE, or other Sonnet PCIe card that requires a driver is not loading. | Dec-22-19 |
| |
