| ID | | Article Title | Post Date |
|
36 | 
| What are the benefits of supporting Spread Spectrum Clocking (SSC)? | Mar-02-10 |
|
37 |
| Is it possible to boot from a volume that resides on the Tempo SATA card? | Mar-02-10 |
|
39 |
| Can I hot-swap a disk drive that is attached to any Sonnet Tempo Serial ATA card? | Mar-23-10 |
|
40 | 
| How does hot-swap functionality work? | Mar-02-10 |
| Hot-swap functionality enables you to connect and disconnect drives without having to power down your computer. This does not mean you can simply pull out a drive at any time; you must put away ("eject", "unmount", "dismount") the drive volume. For Mac OS X users, simply drag the drive icon associated with the drive(s) you wish to remove to the eject icon on the dock; Windows users using a Tempo SATA ExpressCard/34 may left-click on the eject icon in the taskbar for the drive they wish to eject. Only after the drives are ejected (unmounted) is it safe for you to disconnect the drives or cables. If you do not follow this procedure, data on your drives may become corrupted. |
| |
|
42 |
| Can the Tempo SATA cards co-exist with other manufacturers' Serial ATA cards? | Oct-27-09 |
|
63 |
| Can I operate two Tempo SATA cards in the same system? | Sep-02-09 |
| Yes, this is a great way to expand capacity and performance. If two or more Tempo-X, X4+4, X8, X4i, X4P, E4i, or E4P cards are installed to the same machine they must all have the same firmware version to avoid conflicts. |
| |
|
67 |
| What kind of performance can I expect from a using a Sonnet Tempo SATA Card in a PCI slot (like in a Power Mac G4)? | Oct-12-09 |
|
106 |
| Is Tempo SATA E4P, E4i, X4P, or X4i compatible with Red Hat Linux? | Sep-02-09 |
| Tempo SATA E4P, E4i, X4P, and X4i are supported under Red Hat Enterprise 4 Linux with Marvell (TSATAII chip set) drivers. The Marvell Linux driver supports direct connect drives but not port multipliers, so there is no compatibility with the Fusion D4Q, Fusion D5P, Fusion R4Q and Fusion R4P storage systems. As in Windows, drives must be connected at boot time. |
| |
|
120 |
| How do I set up a RAID 0 striped array under Windows XP Professional or Vista? | Mar-23-10 |
|
121 |
| Can I set up a RAID 1 mirrored array under Windows XP or Vista? | Mar-23-10 |
|
404 |
| The Sonnet Tempo SATA card does not work with my Western Digital My Book Premium ES Edition, or Seagate Technology FreeAgent Pro. | Mar-02-10 |
|
452 |
| I upgraded my Tempo SATA software in a PowerMac G4 or G5 and the card is giving a lot of system errors. | Oct-12-09 |
|
454 |
| I have connected a large hardware RAID volume (for example, a 4TB Fusion D400QR5) to a Sonnet Pro SATA card in a Macintosh, and it is showing up as only 2TB. Why? | Oct-14-09 |
| Under Mac OS X 10.3 and 10.4, a volume greater than 2TB will show as a 2TB volume due to a limitation in Apple's ATA layer (just above the driver). Sonnet plans to provide a 10.4 fix in the next driver release. Under Mac OS X 10.5 and 10.6, the full capacity of the RAID volume is available. |
| |
|
459 |
| The performance of my drive array is significantly less than I expect. | Jun-14-11 |
|
544 |
| How do I uninstall the Sonnet Pro SATA Driver? | Dec-26-10 |
|
757 |
| My Stardom RAIDSonic ST3620-2S-S2 is not reliable with 6Gb drives and and a 6Gb controller. | Jul-08-13 |
| |
