| ID | | Article Title | Post Date |
|
36 | 
| What are the benefits of supporting Spread Spectrum Clocking (SSC)? | Mar-02-10 |
|
37 |
| Is it possible to boot from a volume that resides on the Tempo SATA card? | Mar-02-10 |
|
39 |
| Can I hot-swap a disk drive that is attached to any Sonnet Tempo Serial ATA card? | Mar-23-10 |
|
40 | 
| How does hot-swap functionality work? | Mar-02-10 |
| Hot-swap functionality enables you to connect and disconnect drives without having to power down your computer. This does not mean you can simply pull out a drive at any time; you must put away ("eject", "unmount", "dismount") the drive volume. For Mac OS X users, simply drag the drive icon associated with the drive(s) you wish to remove to the eject icon on the dock; Windows users using a Tempo SATA ExpressCard/34 may left-click on the eject icon in the taskbar for the drive they wish to eject. Only after the drives are ejected (unmounted) is it safe for you to disconnect the drives or cables. If you do not follow this procedure, data on your drives may become corrupted. |
| |
|
63 |
| Can I operate two Tempo SATA cards in the same system? | Sep-02-09 |
|
106 |
| Is Tempo SATA E4P, E4i, X4P, or X4i compatible with Red Hat Linux? | Sep-02-09 |
|
120 |
| How do I set up a RAID 0 striped array under Windows XP Professional or Vista? | Mar-23-10 |
|
121 |
| Can I set up a RAID 1 mirrored array under Windows XP or Vista? | Mar-23-10 |
| No. RAID 1 mirroring is only supported under Windows Server, not Windows XP or Vista. |
| |
|
165 |
| Tempo SATA or Tempo SATA RAID133 won't boot from Mac OS 9.x when it is installed in a partition greater than 190GB. | Apr-25-10 |
|
193 |
| Is target disk mode supported on TSATA? | May-12-09 |
|
206 |
| The Tempo SATA card does not seem to work properly in my Power Mac G4. Do I need different firmware? | Apr-25-10 |
|
207 |
| Why can't I install Mac OS X 10.5 (Leopard) on a drive attached to the Tempo SATA card? | May-12-09 |
| The Tempo SATA is bootable with Mac OS X. For some users the drive does not show up when the\u160 Mac OS X 10.5 (Leopard) DVD is inserted. This is a bug in the Leopard installer program.
In this case, using SuperDuper or Carbon Copy Cloner to clone the current boot drive to the\u160 hard drive on the Tempo SATA allows the drive to be seen by the Mac OS X installer. |
| |
|
757 |
| My Stardom RAIDSonic ST3620-2S-S2 is not reliable with 6Gb drives and and a 6Gb controller. | Jul-08-13 |
| |
