Fusion R800RAID
Please click the arrow next to the category to expand or collapse:
Driver (4)
IDDownload TitleDownload LinkPost Date
379 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X 10.6.8-10.8.5) 4.07
Download Now
Oct-17-2012
Operating System Requirements: Mac OS X 10.6+, Mac OS X Server 10.6+
Description: This software includes the latest flash bundle (v2012_05_21), driver (v4.01), and Configuration Tool (v4.07) software for the R380 RAID controller card included with Fusion D400RAID, D800RAID, DX800RAID, R800RAID, and RX1600RAID (part number FUS-RX16SR-xxTB) storage systems.

Release Notes:
• This flash bundle release fixes an issue where the ConfigTool application would not save NVRAM settings, fixes an issue where the ConfigTool application would incorrectly warn that NVRAM settings were not saved, and fixes a cryptic "HBA Internal Error" message displayed during an attempted rebuild of an invalid RAID group.
• This driver release updates the fan controller daemon for improved operation, and updates the memory allocation for x64 platforms for compatibility with OS X 10.8.2 and later. This driver installer has been updated to support GateKeeper for OS X 10.8 (Mountain Lion).
• This Configuration Tool release adds OS X 10.8 (Mountain Lion) support.

Important Note: Update the Sonnet RAID controller with the latest version of the firmware before installing the operating system driver. Use the latest version of the Configuration Tool application to make these updates.
 
380 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Windows) 4.07
Download Now
Oct-11-2012
408 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Linux)
Download Now
May-08-19
716 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X Versions 10.4.11 through 10.5.8) 3.38
Download Now
Oct-18-2011
 
Firmware (0)
Manual (5)
FAQ (11)
IDArticle TitlePost Date
91 Installation of the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro with a Fusion D800RAID, R800RAID, or D400RAID storage system.May-12-09
Originally, the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro should be installed in the PCIe compatibility slot, not a PCIe 2.0 slot. If the RAID card must be inserted in a PCIe 2.0 slot, please do the following:

1) Upon rebooting your machine, launch the ATTO Configuration Utility.
2) Select the CLI tab and type "automap" to mount the drive array.

Note: A recent firmware was posted to the Sonnet website to address this issue.
 
98 ATTO R380 RAID Software (Feb. 2008)Aug-05-09
101 Fusion storage system activity lights are always on with Seagate ES.2 (Enterprise) drives installed in the drive bays.Oct-22-10
202 Under Mac OS X 10.5.6, the PCI Express Expansion Slot Utility (early Mac Pro) always reports 8x, 1x, 1x, 16x no matter how its set.May-06-09
301 Formatting a drive array greater than 16TB with APT (Apple Partition Table) fails in a Macintosh.Jun-16-09
387 How do I replace a failed drive under warranty if I'm in a sensitive/classified environment and can't send the old one back?Mar-23-10
445 What is the default drive timeout in Fusion RAID systems? Should I change it?Mar-24-10
The default drive timeout Fusion RAID systems is 30 seconds. The default is generally the best, but may be insufficient for some Seagate drives, which in rare instances may not respond within a 30 second timeout and consequently appear as degraded. If you are using Seagate drives, Sonnet recommends setting the timeout to 60 seconds, with the CLI command, "set raidcommandtimeout 60000".
 
450 My storage shows 10% more capacity under OS X 10.6 than under OS X 10.5. Why?Mar-24-10
775 Does the ATTO R380 Support OS X 10.9 (Mavericks)?Oct-21-13
788 Can I use an ATTO R680 with the R800RAID or D800RAID?Jun-24-14
955 Can I use Seagate Iron Wolf drives; or Hitchai and WD drives 8TB and larger?May-31-18