| ID | | Article Title | Post Date |
|
27 | 
| How can I distinguish between the earlier Tempo-X eSATA (4+4 and 8e) products supporting 3 Gigabit/sec speeds and the older cards that support 1.5 Gigabit/sec speeds? | May-07-09 |
|
36 |
| What are the benefits of supporting Spread Spectrum Clocking (SSC)? | Mar-02-10 |
|
37 |
| Is it possible to boot from a volume that resides on the Tempo SATA card? | Mar-02-10 |
|
39 |
| Can I hot-swap a disk drive that is attached to any Sonnet Tempo Serial ATA card? | Mar-23-10 |
|
42 |
| Can the Tempo SATA cards co-exist with other manufacturers' Serial ATA cards? | Oct-27-09 |
|
44 |
| How can I distinguish between the earlier Tempo-X eSATA products supporting 3 Gigabit speeds and the older cards that supported 1.5 Gb speeds? | May-07-09 |
|
63 |
| Can I operate two Tempo SATA cards in the same system? | Sep-02-09 |
|
67 | 
| What kind of performance can I expect from a using a Sonnet Tempo SATA Card in a PCI slot (like in a Power Mac G4)? | Oct-12-09 |
| Our testing has shown that a four-drive array will sustain maximum reads and writes of about 200 MB/second in a 64bit, 33MHz PCI slot. An eight-drive array will not provide any additional performance beyond that of a four-drive array in that slot. To get significantly more performance, you need to use a machine with a PCI-X slot. |
| |
|
174 |
| Drive(s) connected to the Tempo-X SATA 4+4 occasionally do not appear when the computer is booted or an error message regarding the RAID array connected to the Tempo-X SATA 4+4 is occasionally displayed at boot up, and the RAID array cannot be used. | May-07-09 |
|
219 |
| With a Tempo-X SATA host controller installed and drives connected, the computer locks up and will not respond to keyboard or mouse input, and must be forced to power off (press and hold the power button for more than 5 seconds) then restarted. | May-07-09 |
|
220 |
| Multiple Hitachi hard drives connected to a Tempo-X SATA host controller are not always detected (won't mount). | May-07-09 |
|
404 |
| The Sonnet Tempo SATA card does not work with my Western Digital My Book Premium ES Edition, or Seagate Technology FreeAgent Pro. | Mar-02-10 |
|
452 |
| I upgraded my Tempo SATA software in a PowerMac G4 or G5 and the card is giving a lot of system errors. | Oct-12-09 |
| This does not happen often, but sometimes the driver caches do not get purged and the new SATA driver does not get loaded correctly from ROM.
Try this:
1) Delete and empty trash for the following file and two directories:
/System/Library/Extensions.mkext (a file)
/System/Library/Caches/com.apple.kernelcaches (a directory)
/System/Library/Caches/com.apple.romextensions (a directory)
2) Restart |
| |
|
454 |
| I have connected a large hardware RAID volume (for example, a 4TB Fusion D400QR5) to a Sonnet Pro SATA card in a Macintosh, and it is showing up as only 2TB. Why? | Oct-14-09 |
|
459 |
| The performance of my drive array is significantly less than I expect. | Jun-14-11 |
| Another manufacturer's previously-installed SATA driver may be accessing a Sonnet SATA card in error causing a drive access slowdown. For example, we have seen Fusion D400QR5 performance drop from 200MB/s to under 50MB/s in such circumstances. The solution is to remove the other manufacturer's SATA driver. |
| |
|
544 |
| How do I uninstall the Sonnet Pro SATA Driver? | Dec-26-10 |
| |
