Operating System Requirements: Mac OS X 10.6+, macOS 10.12+ Description: This software enables the use of Qio with Mac Pro and MacBook Pro computers with a PCIe slot or ExpressCard slot, respectively, and other Mac computers connected via Thunderbolt. In addition to drivers to support Qio and its SATA controller, this installer installs drivers for supported memory card media. Supports OS X 10.6.8-10.11; macOS 10.12 (Sierra).
Release Notes:
Version 1.5.0 includes an improved, signed uninstaller compatible with macOS 10.12 (Sierra).
Known Issues:
• When using Qio 1.5.0, you may need to start your computer from the shut down state in order for sleep to work properly.
• If you are updating your computer's Qio software from version 1.1.7 or earlier, and you intend to update its OS from OS X 10.7.5 or earlier to 10.8 or later, you MUST install Qio 1.5.x software before upgrading the OS! For more information, see this FAQ .
• Apple removed USB 2.0 over Thunderbolt support beginning in OS X 10.8.2. If you are using the Qio connected via Thunderbolt in 10.8.2+ and you need USB ExpressCard adapter support, then you need to install the USB 2.0 Over Thunderbolt Patch .
Sonnet has tested the following cards with the Drobo S:
Tempo SATA E2P..............................compatible
Tempo SATA E4P..............................not compatible
Tempo SATA ExpressCard/34...........compatible
Tempo SATA Edge ExpressCard/34...compatible
Tempo SATA Pro ExpressCard/34.....not compatible
Tempo SATA X4P..............................not compatible
Qio eSATA ports...............................not compatible
This powering method is not officially supported because the Qio can require more power than one FireWire port's power specification. However, the single FireWire port on the unibody MacBook Pro seems to be capable of providing more power (up to 20W in our test) than its specification. In Sonnet tests under the following conditions:
1) If Qio is used with only memory cards (SxS's or SDHC, but not ExpressCard/34 controller cards; P2 cards but not CardBus controller cards; and/or CF Cards);
2) Qio has not more than one Fusion F2 powered from the Qio; and
3) MacBook Pro is unibody model;
then the Qio plus one Fusion F2 seems to be able to be bus powered from the unibody MacBook Pro FireWire port. You would need to use the FireWire power cable provided with the Fusion F2. Sonnet does not guarantee or support this configuration.
This does not seem to work in MacBook Pro models previous to the unibody.
