Operating System Requirements: Windows 10 (64-bit), Windows 11 Description: SxS UDF Driver software enables reading of MXF files recorded in UDF mode on SxS memory card. [Note: This driver is not sufficient to support the computer communicating with the device. You must also install the SxS Device Driver.] Installation of these drivers enables the Sonnet SF3 Series SxS PRO X Card Reader, SF3 Series SxS Pro Card Reader, SxS PRO X Thunderbolt 3 Single Slot Reader, Echo ExpressCard Thunderbolt Adapter, Qio, and Qio E3. to support UDF files.
Download and install the latest UDF driver, and then restart your computer.
This powering method is not officially supported because the Qio can require more power than one FireWire port's power specification. However, the single FireWire port on the unibody MacBook Pro seems to be capable of providing more power (up to 20W in our test) than its specification. In Sonnet tests under the following conditions:
1) If Qio is used with only memory cards (SxS's or SDHC, but not ExpressCard/34 controller cards; P2 cards but not CardBus controller cards; and/or CF Cards);
2) Qio has not more than one Fusion F2 powered from the Qio; and
3) MacBook Pro is unibody model;
then the Qio plus one Fusion F2 seems to be able to be bus powered from the unibody MacBook Pro FireWire port. You would need to use the FireWire power cable provided with the Fusion F2. Sonnet does not guarantee or support this configuration.
This does not seem to work in MacBook Pro models previous to the unibody.
