![Tempo Trio](http://www.sonnettech.com/product/images/tn_tempotrio_bnr.jpg)
|
Please click the arrow next to the category to expand or collapse: | ![](/support/kb/images/collapse.png) | Firmware (2) | | ID | | Download Title | Download Link | Post Date |
439 |
| Tempo ATA133, Tempo HD, Tempo Trio Firmware Updater (Mac OS 8.1-OS X 10.2) 4.0 | | Aug-07-2009 | | Operating System Requirements: Mac OS 8.1-9.2, Mac OS X 10.1-10.2 Description: This software updates the firmware on the Tempo ATA133, Tempo HD, and Tempo Trio to version 4.0. This version addresses compatibility issues related to some hard drives with 8MB buffers.
Supported System Software: Mac OS 8.1 through Mac OS 9.2 on systems that do not support Mac OS X; up to Mac OS X Version 10.2 on supported systems
Installation Notes: ***IMPORTANT*** This firmware updater is only for use with Tempo ATA133, Tempo HD, and Tempo Trio PCI Host Adapter cards. Large hard drives (greater than 137GB) are supported under Mac OS 9 and OS X 10.2 with firmware Version 4.5. If you are not planning to use these large drives, download this firmware (Version 4.0).
Installation Instructions:
1) Before proceeding with the firmware update, you must ensure your system is NOT booted in Mac OS X, nor Mac OS X Classic mode; this software will only function in Mac OS 8.1 through Mac OS 9.2.
2) After expanding the .sit file, double-click the Tempo ATA133 Firmware 4.0 icon. Click Continue, then click Update Firmware. Once the update is complete, a dialog will appear stating that the firmware was updated successfully; quit the application, then select Restart from the Apple menu for the changes to take effect.
Known Issues: In Apple System Profiler, drive volumes are not reported. | |
440 |
| Tempo ATA133, Tempo HD, and Tempo Trio Large Drive Support Firmware (Mac OS 9, OS X 10.2) 4.5.0 | | Aug-07-2009 | |
|
![](/support/kb/images/collapse.png) | FAQ (3) | | ID | | Article Title | Post Date |
52 |
| Can I boot Mac OS X from a drive set to Slave on a Tempo ATA or Tempo Trio card? | Jul-22-09 | | No. Booting Mac OS X from a drive set to the Slave position is not supported. In order to boot Mac OS X from a drive connected to a Tempo card, the drive must be set to the Master position. | |
53 |
| Are there any known compatibility issues with the Tempo Trio? | Jul-22-09 | | Beige Power Macintosh G3 Minitower and Desktop machines with a revision 3 logic board are incompatible with the Tempo Trio card. To determine your machine's logic board revision, check the ROM revision information listed in Apple System Profiler; if it is $77D.45F2, your machine has a revision 3 logic board. | |
172 |
| How do I uninstall the Mac OS X USB 2.0 drivers when using a Tempo Trio under Mac OS 10.2.8 or earlier? | May-07-09 | |
|
|
|