ID | | Article Title | Post Date |
36 |
| What are the benefits of supporting Spread Spectrum Clocking (SSC)? | Mar-02-10 |
37 |
| Is it possible to boot from a volume that resides on the Tempo SATA card? | Mar-02-10 |
39 |
| Can I hot-swap a disk drive that is attached to any Sonnet Tempo Serial ATA card? | Mar-23-10 |
40 |
| How does hot-swap functionality work? | Mar-02-10 |
42 |
| Can the Tempo SATA cards co-exist with other manufacturers' Serial ATA cards? | Oct-27-09 |
63 |
| Can I operate two Tempo SATA cards in the same system? | Sep-02-09 |
| Yes, this is a great way to expand capacity and performance. If two or more Tempo-X, X4+4, X8, X4i, X4P, E4i, or E4P cards are installed to the same machine they must all have the same firmware version to avoid conflicts. |
  |
116 |
| Tempo SATA E2P does not work in Slot 2 of a Mac Pro (Early 2008) model. | Jan-14-10 |
120 |
| How do I set up a RAID 0 striped array under Windows XP Professional or Vista? | Mar-23-10 |
| To create a striped array you must first have at least two drives with a portion of 'unpartitioned space' free. The largest stripe you can create will be twice the size of the smallest unused space on either of the disks. If you have two disks, one with 500GB of unpartitioned space and one with 750GB, the largest striped array you could create would be 2 x 500GB = 1000GB, as the area of space used by the stripe on each disk must be the same.
The first step is to convert both disks from basic to dynamic disks within Windows. A dynamic disk is a disk that contains an additional database of other dynamic disks on the system. Dynamic disks can only be read by Windows XP Professional, Windows Vista, and the various Windows Server operating systems, and are required to create software RAID arrays within Windows.
To convert a disk from basic to dynamic, follow these steps:
1) Right click the grey box on the left that contains the disk names (disk 1, disk 2, etc.) and select 'convert to dynamic disk'.
2) From the next window you can check both blank drives and click 'ok' to convert them.
3) Once both disks are listed as dynamic, right click the 'unpartitioned space' of either drive and select 'new volume.'
4) In the 'select volume type' window, select 'striped.' Add all disks you wish to use, then decide on the amount of space on both disks you wish to use for the striped volume you are about to create. If you wish, you use only part of each disk for the stripe, leaving the rest free for other uses.
5) Choose a drive letter or folder to use, and the method of formatting, and you are done. The striped array will format and be ready for use. |
  |
121 |
| Can I set up a RAID 1 mirrored array under Windows XP or Vista? | Mar-23-10 |
401 |
| Do the Tempo SATA E2P, Tempo SATA Edge ExpressCard/34 and Tempo SATA ExpressCard/34 controllers support Snow Leopard? | Feb-16-11 |
404 |
| The Sonnet Tempo SATA card does not work with my Western Digital My Book Premium ES Edition, or Seagate Technology FreeAgent Pro. | Mar-02-10 |
491 |
| Are Sonnet Tempo SATA cards compatible with the Drobo S? | Feb-02-11 |
| Sonnet has tested the following cards with the Drobo S:
Tempo SATA E2P..............................compatible
Tempo SATA E4P..............................not compatible
Tempo SATA ExpressCard/34...........compatible
Tempo SATA Edge ExpressCard/34...compatible
Tempo SATA Pro ExpressCard/34.....not compatible
Tempo SATA X4P..............................not compatible
Qio eSATA ports...............................not compatible
|
  |
515 |
| My Drobo S is reporting a device removal error after waking a Macintosh from sleep. | Apr-08-10 |
584 |
| I installed Mac OS 10.7 (Lion) and my card stopped working. | Jul-27-11 |
945 |
| Will the Tempo SATA E2P PCIe card or Tempo SATA ExpressCard/34 ever be compatible with macOS High Sierra? | Sep-29-17 |
  |