What's New
Support
Where to Buy
Store
Videos
Products
Please click the arrow next to the category to expand or collapse:
Driver (2)
Firmware (0)
Manual (2)
FAQ (13)
ID
Article Title
Post Date
72
The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD.
May-12-09
78
Why does the Encore/ZIF (700MHz and faster) require that my Blue & White or PCI Graphics G4 bus speed be slowed to 66MHz? Doesn't that slow down my computer?
May-12-09
169
May I discard my original CPU after installing Sonnet's upgrade cards?
May-07-09
171
The speed indicated on the G3 or G4 chip on my Sonnet processor upgrade doesn't seem to match the speed of the upgrade I purchased. What's the story?
May-07-09
175
The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD while using Mac OS 9.
May-07-09
218
The computer's standard startup process takes noticeably longer after upgrading to any Mac OS 9.x system from Mac OS 8.6 or earlier.
May-12-09
238
System will not start following installation of the processor upgrade card, or may fail shortly after restart. IMPORTANT! Do not continue attempts to restart—immediately unplug your computer.
May-12-09
239
Encore firmware updater must be run to allow installation of a G4 processor in these machines, but this software is not available for Mac OS X.
Jun-25-09
240
During Crescendo/Encore Install 1.4.6 software installation, the system displays an error message stating "Your computer's firmware does not have the Sonnet G4-enabling patch installed."
May-12-09
241
While applying the Sonnet G3 firmware patch on a Power Macintosh G3 (Blue & White) computer, the updater stops and either: a) The error message, "Assertion (modPtr) failed in firmwareUpdater.c on line 236" appears. OR b) Your system boots to the desktop and a message stating, "Your computer's firmware does not have the Sonnet G4-enabling patch installed" appears.
Jul-23-09
242
After following all of the instructions in the included User's Quick Start Guide and installing the Encore/ZIF G4 upgrade card, the computer freezes at random during boot up or boots to the desktop without any issues, but crashes randomly, and/or programs unexpectedly quit.
May-12-09
243
After removing and replacing my Encore/ZIF card during the course of troubleshooting, or after moving it from one machine to another, my computer has stopped booting, or started crashing shortly after booting.
May-12-09
244
After following all of the instructions in the included User's Quick Start Guide and installing the Encore/ZIF G4 upgrade card, my computer crashes during boot up. The computer generates the boot chime and video is displayed, however, the boot process stops with just a cursor on screen.
May-12-09
