| ID | | Article Title | Post Date |
|
72 | 
| The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD. | May-12-09 |
| Under certain conditions, the Crescendo/Encore Installer application encounters conflicts that cause it to hang, or even crash the computer when the computer is booted in Mac OS 9 with extensions on.
Solution:
1) If you have attempted to run the application directly from the Sonnet Installer CD, copy the Crescendo/Enc Ins file from the CD to the desktop (single-click and drag the file from the Mac OS 7-9 ONLY, not CLASSIC folder on to the desktop). Otherwise, go to step 2.
2) Restart the computer under Mac OS 9 with extensions off (hold down the Shift key when you turn on the computer until the message "Extensions Off" appears).
3) Launch the Crescendo/Encore Installer from the desktop and follow the instructions. |
| |
|
73 | 
| What are the known incompatibilities with the Crescendo/PCI G4 700 and 800? | May-12-09 |
|
74 |
| Why can't I run Mac OS 9.2 on my computer upgraded with a Crescendo/PCI G4 800 (or 700)? | May-12-09 |
|
169 |
| May I discard my original CPU after installing Sonnet's upgrade cards?
| May-07-09 |
| Sonnet recommends that you keep the original processor card even after installing our upgrade cards in case you ever need them. |
| |
|
171 |
| The speed indicated on the G3 or G4 chip on my Sonnet processor upgrade doesn't seem to match the speed of the upgrade I purchased. What's the story? | May-07-09 |
|
175 |
| The Crescendo/Encore installer hangs, or crashes the system; occurs most often when run from the Sonnet installer CD while using Mac OS 9. | May-07-09 |
|
218 |
| The computer's standard startup process takes noticeably longer after upgrading to any Mac OS 9.x system from Mac OS 8.6 or earlier. | May-12-09 |
|
228 |
| System will not finish start-up process. Hang or crash occurs before desktop appears. | Jun-23-09 |
|
229 |
| After installing my new Crescendo/PCI processor upgrade in a Power Tower Pro, I can hear the boot chime when I turn the computer on, but the video display never comes up. | May-12-09 |
|
230 |
| After installing a Crescendo/ PCI G4 700 or 800 MHz upgrade, I opened Apple System Profiler and it is reporting the processor type as unknown and the speed as 450 MHz. | May-12-09 |
|
231 |
| After following the instructions and installing both the Crescendo/PCI G4 700 or 800 MHz upgrade card and its included software into my computer, the video is distorted and my cursor is a rectangular block that cannot move more than halfway down the screen. | Jun-23-09 |
|
233 |
| G4 performance drops following Mac OS 9.x system software update. | May-12-09 |
| |
