| ID | | Article Title | Post Date |
|
661 | 
| I'm using OWC Mercury Extreme Pro 6G SSDs with a Tempo SSD or Tempo SSD Pro adapter in a Thunderbolt Expansion Chassis and the system hangs after waking from sleep. | Oct-01-16 |
|
731 |
| How fast will an SSD be in an Echo Express Thunderbolt chassis using the Tempo SSD, SSD Pro or SSD Pro Plus? | Dec-30-17 |
|
735 | 
| My Tempo SSD, Tempo SSD Pro or Tempo SATA Pro 6Gb 4-Port card prevents my HP Z820 from booting. | Dec-30-17 |
| You need to update the BIOS to Version 2.55 Rev A or newer available here: http://h20565.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5228610&lang=en&cc=us |
| |
|
758 |
| Can I install Mac OS directly onto SSDs (or an SSD RAID) on the card? Will I get a recovery partition? | Dec-30-17 |
|
777 |
| Does the Tempo SSD, Tempo SSD Pro, or Tempo SSD Pro Plus support 15mm 2.5" drives? | Dec-30-17 |
|
964 |
| Does the Tempo SSD, Tempo SSD Pro, or Tempo SSD Pro Plus work in a Magma Thunderbolt 1 Chassis | Dec-30-17 |
|
976 |
| In a Mac Pro, the SSDs are seen as external drives, how do I prevent accidental ejects? | Feb-14-23 |
|
987 |
| Can I install a Boot Camp partition on my Tempo SSD in my Mac Pro? | Jan-12-18 |
| Apple supports Boot Camp only on internal drives. See Apple's support page, Set up a Windows Partition on Your Mac, which states "The drive you're partitioning must be an internal drive." The Tempo SSD appears to the Mac Pro as an external drive, because it uses a controller connected to the PCIe bus, and not to a controller on the motherboard. Sonnet can't support a configuration that Apple doesn't support. If you want to use Boot Camp from an SSD, you need to make it an internal drive. Plug the SSD into a Sonnet Transposer, screw it into one of your Mac Pro trays, thereby making it an internal drive.
9TO5Mac has published a proceedure to install Boot Camp on an external drive, but Sonnet does not support this.
|
| |
|
992 |
| The write speed of my Samsung 830, 840, 840 EVO, 840 PRO, 850 EVO or 850 PRO has slowed to below 100MB/s. | Mar-30-20 |
| You need to update the firmware of your Samsung SSD. See the Samsung Firmware Updater Page.
|
| |
|
1011 |
| How do I use Sonnet's SATA cards in VMWare/vSphere 5.5+? | Mar-27-18 |
|
1012 |
| Do Sonnet SATA cards support NexStar Dual Bay Drive Docks and Icy Box IB-3640SU3 with SATA interface? | Oct-04-19 |
|
1064 |
| In a Mac Pro, can I install Windows on a Tempo SSD or SSD Pro Plus? | Jul-15-19 |
|
1073 |
| How do I configure RAID under macOS? | Feb-14-23 |
|
1095 |
| I'm using this card with macOS 10.15 and am experiencing Kernel Panics | Mar-15-20 |
|
1126 |
| Option-boot doesn't function in Mac Pro 5,1 when a bootable Mac OS is installed on a Tempo SSD | Jan-02-21 |
| There were two versions of Tempo SSD.
The original version used the Marvell 88SE9182 SATA controller.
The current version uses an ASMedia ASM1062 SATA controller.
With the discontinued Marvell controller, if a bootable volume is created on a Tempo SSD, option-boot works fine in the Mac Pro 3,1, 4,1, and 7,1 (2019), but not in the Mac Pro 5,1. The recommended workaround in a Mac Pro 5,1 is to select the boot volume in the Startup Disk System Preferences and restart. If the Tempo SSD has only data volume(s) (not bootable volumes), then option
With the current ASMedia controller, option-boot works fine in the Mac Pro 5,1. |
| |
|
1136 |
| How can I use my new SSD volume to hold my user folder on macOS? | Feb-14-23 |
|
1183 |
| The Write performance of my SSD is very slow under Windows. | Feb-14-23 |
| |
