|
Please click the arrow next to the category to expand or collapse: | | Driver (9) | | ID | | Download Title | Download Link | Post Date |
379 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X 10.6.8-10.8.5) 4.07 | | Oct-17-2012 | | Operating System Requirements: Mac OS X 10.6+, Mac OS X Server 10.6+ Description: This software includes the latest flash bundle (v2012_05_21), driver (v4.01), and Configuration Tool (v4.07) software for the R380 RAID controller card included with Fusion D400RAID, D800RAID, DX800RAID, R800RAID, and RX1600RAID (part number FUS-RX16SR-xxTB) storage systems.
Release Notes:
• This flash bundle release fixes an issue where the ConfigTool application would not save NVRAM settings, fixes an issue where the ConfigTool application would incorrectly warn that NVRAM settings were not saved, and fixes a cryptic "HBA Internal Error" message displayed during an attempted rebuild of an invalid RAID group.
• This driver release updates the fan controller daemon for improved operation, and updates the memory allocation for x64 platforms for compatibility with OS X 10.8.2 and later. This driver installer has been updated to support GateKeeper for OS X 10.8 (Mountain Lion).
• This Configuration Tool release adds OS X 10.8 (Mountain Lion) support.
Important Note: Update the Sonnet RAID controller with the latest version of the firmware before installing the operating system driver. Use the latest version of the Configuration Tool application to make these updates.
| |
380 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Windows) 4.07 | | Oct-11-2012 |
408 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Linux) | | May-08-19 |
492 |
| Sonnet Pseudo Drivers for SAS Expanders embedded in Sonnet DX800RAID and RX1600RAID (Windows XP and Vista) 1.0.1 | | Feb-11-2010 |
531 |
| Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (macOS) 3.76 | | |
532 |
| Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (Windows) 2.75 | | |
533 |
| Sonnet 6Gb/s SAS/SATA RAID (R680) Controller Software (Linux) | | Nov-06-17 |
716 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X Versions 10.4.11 through 10.5.8) 3.38 | | Oct-18-2011 |
1008 |
| Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Config Tool (macOS) 4.27 | | Mar-09-2018 | |
|
| FAQ (10) | | ID | | Article Title | Post Date |
91 |
| Installation of the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro with a Fusion D800RAID, R800RAID, or D400RAID storage system. | May-12-09 |
202 |
| Under Mac OS X 10.5.6, the PCI Express Expansion Slot Utility (early Mac Pro) always reports 8x, 1x, 1x, 16x no matter how its set. | May-06-09 |
301 |
| Formatting a drive array greater than 16TB with APT (Apple Partition Table) fails in a Macintosh. | Jun-16-09 |
302 |
| I connected two Fusion DX800 (RX1600) RAIDs to the same controller, but only one show up to the ATTO configuration tool and the OS. | May-20-09 |
387 |
| How do I replace a failed drive under warranty if I'm in a sensitive/classified environment and can't send the old one back? | Mar-23-10 |
445 |
| What is the default drive timeout in Fusion RAID systems? Should I change it? | Mar-24-10 |
450 |
| My storage shows 10% more capacity under OS X 10.6 than under OS X 10.5. Why? | Mar-24-10 |
737 |
| I daisy-chained two DX800s and my drives don't show up. | Mar-08-18 |
775 |
| Does the ATTO R380 Support OS X 10.9 (Mavericks)? | Oct-21-13 | | Official ATTO support ends with OS X 10.8.5.
With OS X 10.9+, you will no longer be able to boot from a drive or array connected to an ATTO R380, and you will no longer be able to create new RAID groups. You can install current drivers for this card under Mavericks, but there will be no support from ATTO. Furthermore, Mavericks OS will complain at every boot about using unsigned drivers.
To transition to Mavericks, customers with an early Fusion DX800RAID storage unit equipped with an R380 RAID controller can purchase from Sonnet an R680 RAID controller with an included cooling upgrade kit.
All Fusion DX1600RAID units were equipped with an R680 RAID controller, which has complete Mavericks support.
The Fusion D800RAID and R800RAID storage units are not compatible with the ATTO R680 card. To transition to Mavericks, customers with a Fusion D800RAID or R800RAID must upgrade to a DX800 storage unit which includes an R680 controller. The drives can be moved with the RAID array intact. If you would like to make this upgrade, contact Sonnet sales to inquire about purchasing a DX800 without drives. | |
955 |
| Can I use Seagate Iron Wolf drives; or Hitchai and WD drives 8TB and larger? | May-31-18 | |
|
|
|