| ID | | Download Title | Download Link | Post Date |
|
733 | 
| Tempo SSD Pro/Tempo SSD/Tempo SATA Pro 6Gb 4-Port Firmware Updater1.0 | | Jan-29-2013 |
|
790 | 
| Tempo SSD/SSD Pro/SSD Pro Plus/SATA Pro 6Gb 4-Port Firmware Updater (Windows) | | May-08-19 |
| Description: This installer will upgrade the firmware in a Tempo SSD, Tempo SSD Pro, Tempo SSD Pro Plus, or Tempo SATA Pro 6Gb 4 Port card to remove or add the EFI or BIOS boot ROM image. Normally this utility is not needed; however, if you are using any of these products in a Windows machine that implements EFI (Extensible Firmware Interface), we have found some of these machines are incompatible with the Mac-based EFI boot ROM that ships with the product. Typically only newer (2012+ Windows Machines) implement EFI. This utility gives you the option to:
• remove the ROM image altogether
• replace the ROM image with the original ( a combined EFI/BIOS image)
• replace the ROM image with a BIOS only image
Installation:
The included disk image file must be burned to a CD. Then, it can be booted from; it will run a DOS-type shell (actually FreeDOS). The Tempo card must be present in the system when this utility is run. Once in the DOS shell, change to the TempoSSD directory by typing
cd TempoSSD
You can do any of the following tasks:
• remove the ROM image altogether
type GONOROM
• replace the ROM image with the original
type GOROM
• replace the ROM image with a BIOS only image
type GOBIOS
It should find one or two devices, depending on your product. Type "Y" to start programming. After completing, remove the CD and reboot the computer.
New in Version 1.00
- initial release
|
| |
| |
