| ID | | Article Title | Post Date |
|
871 | 
| I can't boot over 10GE from my cylinder Mac Pro. | Nov-29-15 |
| Please upgrade the EEPROM firmware adapter using the following instructions. This upgrade will address the Mac Pro cylinder boot issue.
For Mac OS X customers upgrading in the field:
1) Install the Mac OS X Myri10GE driver.
2) Download the myri-eeprom-1.4.59.mcp2 and the mac myri-tools tarball.
https://www.myricom.com/pub/10g-tools/myri-eeprom-1.4.59.mcp2
https://www.myricom.com/pub/10g-tools/mac-10g-toolkit.tgz
3) Untar the mac myri-tools tarball.
4) Run 'sudo sysctl -w net.myri10ge.enX.enable_10gtools=1' where enX is the name of device for the Myricom adapter.
For more details, please read the FAQ entry:
https://www.myricom.com/software/myri-10g-network-adapter-tool-kit/846-do-you-provide-myri-info-and-ze-upgrade-for-mac-os-x.html
5) Run 'sudo ze-upgrade myri-eeprom-1.4.59.mcp2' and reboot.
If there is a verification failure with the ze-upgrade command, please re-run the command. |
| |
|
993 | 
| My system crashes, freezes, or fails to connect when I talk to a storage device on the network | May-13-22 |
|
994 |
| My Twin10G or Presto 10GbE is not working on macOS. | Dec-22-19 |
|
1065 |
| I'm getting very slow performance with my Presto 10G PCIe card or Twin10G Thunderbolt 10G adapter with OS X 10.11-10.12. | Dec-22-19 |
| |
