Fusion R800RAID
Please click the arrow next to the category to expand or collapse:
Driver (4)
Firmware (0)
Manual (5)
IDDownload TitleDownload LinkPost Date
255 Configuration Tool and Utilities Operation Manual [English]May-08-19
290 Fusion R800RAID (Without Drives) User's Guide [English]May-08-19
291 Fusion R800RAID (With Drives) User's Guide [English]May-08-19
User's guide for the Sonnet Fusion R800RAID 8-drive Serial ATA disk array rackmount storage system. These directions apply to storage systems with drives.
 
480 Fusion R800RAID (With Drives) User's Guide [Japanese]May-08-19
594 Configuration Tool and Utilities Operation Manual [Japanese]May-08-19
 
FAQ (11)
IDArticle TitlePost Date
91 Installation of the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro with a Fusion D800RAID, R800RAID, or D400RAID storage system.May-12-09
Originally, the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro should be installed in the PCIe compatibility slot, not a PCIe 2.0 slot. If the RAID card must be inserted in a PCIe 2.0 slot, please do the following:

1) Upon rebooting your machine, launch the ATTO Configuration Utility.
2) Select the CLI tab and type "automap" to mount the drive array.

Note: A recent firmware was posted to the Sonnet website to address this issue.
 
98 ATTO R380 RAID Software (Feb. 2008)Aug-05-09
101 Fusion storage system activity lights are always on with Seagate ES.2 (Enterprise) drives installed in the drive bays.Oct-22-10
202 Under Mac OS X 10.5.6, the PCI Express Expansion Slot Utility (early Mac Pro) always reports 8x, 1x, 1x, 16x no matter how its set.May-06-09
301 Formatting a drive array greater than 16TB with APT (Apple Partition Table) fails in a Macintosh.Jun-16-09
387 How do I replace a failed drive under warranty if I'm in a sensitive/classified environment and can't send the old one back?Mar-23-10
445 What is the default drive timeout in Fusion RAID systems? Should I change it?Mar-24-10
The default drive timeout Fusion RAID systems is 30 seconds. The default is generally the best, but may be insufficient for some Seagate drives, which in rare instances may not respond within a 30 second timeout and consequently appear as degraded. If you are using Seagate drives, Sonnet recommends setting the timeout to 60 seconds, with the CLI command, "set raidcommandtimeout 60000".
 
450 My storage shows 10% more capacity under OS X 10.6 than under OS X 10.5. Why?Mar-24-10
775 Does the ATTO R380 Support OS X 10.9 (Mavericks)?Oct-21-13
788 Can I use an ATTO R680 with the R800RAID or D800RAID?Jun-24-14
955 Can I use Seagate Iron Wolf drives; or Hitchai and WD drives 8TB and larger?May-31-18