Fusion DX800RAID
Please click the arrow next to the category to expand or collapse:
Driver (9)
IDDownload TitleDownload LinkPost Date
379 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X 10.6.8-10.8.5) 4.07Oct-17-2012
380 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Windows) 4.07Oct-11-2012
Operating System Requirements: Windows XP (32-bit), Windows XP (64-bit), Windows Vista (32-bit), Windows Vista (64-bit), Windows 7 (32-bit), Windows 7 (64-bit), Windows Server 2003 (32-bit), Windows Server 2003 (64-bit), Windows Server 2008 (32-bit), Windows Server 2008 (64-bit)
Description: This software includes the latest flash bundle (v2012_05_21), driver (v3.70), and Configuration Tool (v4.07) software for the R380 RAID controller card included with Fusion D400RAID, D800RAID, DX800RAID, R800RAID, and RX1600RAID (part number FUS-RX16SR-xxTB) storage systems.

Release Notes:
• This flash bundle release fixes an issue where the ConfigTool application would not save NVRAM settings, fixes an issue where the ConfigTool application would incorrectly warn that NVRAM settings were not saved, and fixes a cryptic "HBA Internal Error" message displayed during an attempted rebuild of an invalid RAID group.
• This driver release is the latest driver available.
• This Configuration Tool release adds support for time-stamped log messages from a RAID device.

Note: Update the Sonnet RAID controller with the latest version of the firmware before installing the operating system driver. Use the latest version of the Configuration Tool application to make these updates.

 
408 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Linux)May-08-19
492 Sonnet Pseudo Drivers for SAS Expanders embedded in Sonnet DX800RAID and RX1600RAID (Windows XP and Vista) 1.0.1Feb-11-2010
531 Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (macOS) 3.76
532 Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (Windows) 2.75
533 Sonnet 6Gb/s SAS/SATA RAID (R680) Controller Software (Linux)Nov-06-17
716 Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X Versions 10.4.11 through 10.5.8) 3.38Oct-18-2011
1008 Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Config Tool (macOS) 4.27Mar-09-2018
 
Firmware (0)
Manual (5)
FAQ (10)
IDArticle TitlePost Date
91 Installation of the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro with a Fusion D800RAID, R800RAID, or D400RAID storage system.May-12-09
Originally, the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro should be installed in the PCIe compatibility slot, not a PCIe 2.0 slot. If the RAID card must be inserted in a PCIe 2.0 slot, please do the following:

1) Upon rebooting your machine, launch the ATTO Configuration Utility.
2) Select the CLI tab and type "automap" to mount the drive array.

Note: A recent firmware was posted to the Sonnet website to address this issue.
 
202 Under Mac OS X 10.5.6, the PCI Express Expansion Slot Utility (early Mac Pro) always reports 8x, 1x, 1x, 16x no matter how its set.May-06-09
301 Formatting a drive array greater than 16TB with APT (Apple Partition Table) fails in a Macintosh.Jun-16-09
302 I connected two Fusion DX800 (RX1600) RAIDs to the same controller, but only one show up to the ATTO configuration tool and the OS.May-20-09
387 How do I replace a failed drive under warranty if I'm in a sensitive/classified environment and can't send the old one back?Mar-23-10
445 What is the default drive timeout in Fusion RAID systems? Should I change it?Mar-24-10
450 My storage shows 10% more capacity under OS X 10.6 than under OS X 10.5. Why?Mar-24-10
737 I daisy-chained two DX800s and my drives don't show up.Mar-08-18
775 Does the ATTO R380 Support OS X 10.9 (Mavericks)?Oct-21-13
955 Can I use Seagate Iron Wolf drives; or Hitchai and WD drives 8TB and larger?May-31-18
Some newer drives use a hole pattern different from the traditional drive hole pattern for the bottom mounting points. The location of the bottom holes close to the connector did not change; however, the bottom holes near the middle have been removed and replaced with bottom holes close to the front of the drive.

The drives with the new bottom hole pattern include:
Seagate Iron Wolf drives (also missing the middle hole from the side mount hole troika)
Hitachi drives 8TB and larger
WD drives 8TB and larger

Incompatible mount holes
Echo 15+ Dock (side mount, but needs middle hole, so incompatible with only Seagate Iron Wolf)
Fusion F3 (bottom mount)
Fusion D400Q/R400P/D500P (bottom mount)
Fusion D800/R800 (bottom mount)

Compatible mount holes
Fusion R400S RAID (side mount)
Fusion R400 RAID USB 3 (side mount)
Fusion DX800/RX1600 (side mount) If using Iron Wolf line, must use Iron Wolf Pro with rotational vibration sensors