|
Please click the arrow next to the category to expand or collapse: | | Driver (9) | | ID | | Download Title | Download Link | Post Date |
379 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X 10.6.8-10.8.5) 4.07 | | Oct-17-2012 |
380 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Windows) 4.07 | | Oct-11-2012 |
408 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (Linux) | | May-08-19 |
492 |
| Sonnet Pseudo Drivers for SAS Expanders embedded in Sonnet DX800RAID and RX1600RAID (Windows XP and Vista) 1.0.1 | | Feb-11-2010 |
531 |
| Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (macOS) 3.76 | | |
532 |
| Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Software (Windows) 2.75 | | | | Operating System Requirements: Windows 8, Windows 8 (64-bit), Windows 8.1, Windows 10, Windows 10 (64-bit), Windows Server 2008 (32-bit), Windows Server 2008 (64-bit), Windows Server 2008 R2 (64-bit), Windows Server 2012, Windows Server 2012 R2, Windows Server 2016 Description: This software includes the latest flash bundle, driver, and ConfigTool application software for the Sonnet 6Gb/s SAS/SATA RAID controller card (R680) included with Fusion DX800RAID (newer models), Fusion DX800RAID Thunderbolt Edition, and Fusion RX1600RAID (part number FUS-RX16S6-xxTB) storage systems.
Important Note:
• You must update the firmware and driver software before updating to the latest Configuration Tool application.
| |
533 |
| Sonnet 6Gb/s SAS/SATA RAID (R680) Controller Software (Linux) | | Nov-06-17 |
716 |
| Sonnet 3Gb/s SAS/SATA RAID (R380) Software (OS X Versions 10.4.11 through 10.5.8) 3.38 | | Oct-18-2011 |
1008 |
| Sonnet 6Gb/s SAS/SATA RAID Controller (R680) Config Tool (macOS) 4.27 | | Mar-09-2018 | |
|
| FAQ (10) | | ID | | Article Title | Post Date |
91 |
| Installation of the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro with a Fusion D800RAID, R800RAID, or D400RAID storage system. | May-12-09 | | Originally, the Sonnet (ATTO OEM) RAID card in an 8-core Mac Pro should be installed in the PCIe compatibility slot, not a PCIe 2.0 slot. If the RAID card must be inserted in a PCIe 2.0 slot, please do the following:
1) Upon rebooting your machine, launch the ATTO Configuration Utility.
2) Select the CLI tab and type "automap" to mount the drive array.
Note: A recent firmware was posted to the Sonnet website to address this issue. | |
202 |
| Under Mac OS X 10.5.6, the PCI Express Expansion Slot Utility (early Mac Pro) always reports 8x, 1x, 1x, 16x no matter how its set. | May-06-09 |
301 |
| Formatting a drive array greater than 16TB with APT (Apple Partition Table) fails in a Macintosh. | Jun-16-09 |
302 |
| I connected two Fusion DX800 (RX1600) RAIDs to the same controller, but only one show up to the ATTO configuration tool and the OS. | May-20-09 |
387 |
| How do I replace a failed drive under warranty if I'm in a sensitive/classified environment and can't send the old one back? | Mar-23-10 |
445 |
| What is the default drive timeout in Fusion RAID systems? Should I change it? | Mar-24-10 |
450 |
| My storage shows 10% more capacity under OS X 10.6 than under OS X 10.5. Why? | Mar-24-10 |
737 |
| I daisy-chained two DX800s and my drives don't show up. | Mar-08-18 |
775 |
| Does the ATTO R380 Support OS X 10.9 (Mavericks)? | Oct-21-13 |
955 |
| Can I use Seagate Iron Wolf drives; or Hitchai and WD drives 8TB and larger? | May-31-18 | | Some newer drives use a hole pattern different from the traditional drive hole pattern for the bottom mounting points. The location of the bottom holes close to the connector did not change; however, the bottom holes near the middle have been removed and replaced with bottom holes close to the front of the drive.
The drives with the new bottom hole pattern include:
Seagate Iron Wolf drives (also missing the middle hole from the side mount hole troika)
Hitachi drives 8TB and larger
WD drives 8TB and larger
Incompatible mount holes
Echo 15+ Dock (side mount, but needs middle hole, so incompatible with only Seagate Iron Wolf)
Fusion F3 (bottom mount)
Fusion D400Q/R400P/D500P (bottom mount)
Fusion D800/R800 (bottom mount)
Compatible mount holes
Fusion R400S RAID (side mount)
Fusion R400 RAID USB 3 (side mount)
Fusion DX800/RX1600 (side mount) If using Iron Wolf line, must use Iron Wolf Pro with rotational vibration sensors
| | |
|
|
|