| ID | | Article Title | Post Date |
|
36 | 
| What are the benefits of supporting Spread Spectrum Clocking (SSC)? | Mar-02-10 |
|
37 |
| Is it possible to boot from a volume that resides on the Tempo SATA card? | Mar-02-10 |
|
39 | 
| Can I hot-swap a disk drive that is attached to any Sonnet Tempo Serial ATA card? | Mar-23-10 |
| Yes, but it depends on the computer's operating system (Mac OS or Windows). Sonnet Tempo SATA PCIe, PCI-X, PCI, and ExpressCard/34 cards support drive hot swapping only when used in Mac computers running Mac OS. SATA drive hot swapping is not supported in a desktop or server PC running Windows XP, Server 2003, or Vista. A SATA drive appears to Windows as a fixed hard drive and there is no mechanism in Windows to prepare the drive for removal except in notebook computers.
Tempo SATA and SATA Pro ExpressCard/34 cards support drive hot swapping in both Mac and Windows notebook computers. |
| |
|
40 |
| How does hot-swap functionality work? | Mar-02-10 |
|
42 |
| Can the Tempo SATA cards co-exist with other manufacturers' Serial ATA cards? | Oct-27-09 |
| Often, yes. Sometimes, not. Some other manufacturers' drivers may incorrectly assume a Sonnet card is their SATA card which may cause havoc. The symptoms include significantly slower performance, driver not loading, or both drivers loading and causing and kernel panics as they both try to access the same card. Sonnet recommends removing other manufacturer's card(s) and driver(s) if a problem of this type occurs. |
| |
|
43 |
| Can I operate a Sonnet PCIe (x4) card in a PCIe x8 or x16 slot? | Mar-02-10 |
|
63 |
| Can I operate two Tempo SATA cards in the same system? | Sep-02-09 |
|
87 |
| I cannot get the Tempo SATA E4P to install properly under Windows Home Server. | Sep-02-09 |
|
103 |
| Tempo SATA E4P not recognized in a Mac Pro. | Sep-02-09 |
|
106 |
| Is Tempo SATA E4P, E4i, X4P, or X4i compatible with Red Hat Linux? | Sep-02-09 |
|
120 |
| How do I set up a RAID 0 striped array under Windows XP Professional or Vista? | Mar-23-10 |
|
121 |
| Can I set up a RAID 1 mirrored array under Windows XP or Vista? | Mar-23-10 |
|
404 |
| The Sonnet Tempo SATA card does not work with my Western Digital My Book Premium ES Edition, or Seagate Technology FreeAgent Pro. | Mar-02-10 |
|
452 |
| I upgraded my Tempo SATA software in a PowerMac G4 or G5 and the card is giving a lot of system errors. | Oct-12-09 |
|
454 |
| I have connected a large hardware RAID volume (for example, a 4TB Fusion D400QR5) to a Sonnet Pro SATA card in a Macintosh, and it is showing up as only 2TB. Why? | Oct-14-09 |
|
459 |
| The performance of my drive array is significantly less than I expect. | Jun-14-11 |
|
491 |
| Are Sonnet Tempo SATA cards compatible with the Drobo S? | Feb-02-11 |
|
544 |
| How do I uninstall the Sonnet Pro SATA Driver? | Dec-26-10 |
|
653 |
| I connected a Red Station media reader to the eSATA ports, but the media would not mount. How do I mount the media? | May-06-13 |
|
659 |
| eSATA drives won't mount after updating to OS X 10.7.4 | Jun-22-12 |
|
972 |
| After I upgraded macOS, the Twin10G, Presto 10GbE, or other Sonnet PCIe card that requires a driver is not loading. | Dec-22-19 |
| If you have already installed a Sonnet Driver and it is not loading:
1) Restart (forces Mac OS to scan for unloaded drivers).
2) Go to System Preferences...Security & Privacy panel...General tab. You will see a message, "System software from developer "Sonnet Technologies" was blocked from loading." Click Allow. Note that you must have a hard-wired mouse/trackpad to click allow. If you are connecting via Remote Access, then macOS prevents you from clicking Allow.
3) Restart. |
| |
| |
