Allegro Pro 4 USB 3.2 Gen 2 Type A PCIe Card (USB3-PRO-4P10-E)
Please click the arrow next to the category to expand or collapse:
Driver (1)
IDDownload TitleDownload LinkPost Date
977 Allegro USB 3.2 (3.1) Gen 2 (10Gbps) PCIe Driver for Windows 7 1.16.59.1
Download Now
Jun-11-2020
Operating System Requirements: Windows 7 (32-bit), Windows 7 (64-bit), Windows Server 2008 R2 (64-bit)
Description: Installation of this software provides support for Sonnet's Allegro USB-C PCIe, Allegro USB-C 4-Port PCIe, Allegro Pro Type-A USB 3.2 PCIe and Fusion Dual 2.5" SSD RAID PCIe cards in computers running Windows 7, Windows 7 x64 Edition, and Windows Server 2008 R2 x64.

This driver does not support Windows 8.1 or Windows 10, which have inbox drivers for these cards.
 
 
Firmware (0)
Manual (1)
FAQ (11)
IDArticle TitlePost Date
756 Do the Sonnet USB 2.0 or USB 3 cards support the Apple SuperDrive?Apr-02-22
759 My bus-powered USB 3 drive or SSD will not reliably mount or transfer data.Dec-14-19
817 Storage connected to a USB 3 PCIe card (or Tango combo card) gives an macOS error message upon wake from sleep.May-12-20
To minimize power usage during sleep, power is removed from PCIe cards. Because of this power-saving specification, a USB 3 PCIe card is unable to maintain USB port power during sleep. In macOS, this result in a storage device disconnect upon wake from sleep. The storage device will automatically remount, but the system reports a disconnect message. Because macOS flushes all caches before sleeping, this disconnect should never result in any loss of data.
 
933 What versions of macOS support Allegro USB 3 cards?Apr-02-22
956 What generations of Thunderbolt chassis do Sonnet Allegro PCIe cards support?Apr-02-22
971 One or more of my ports has stopped working on my USB 3 card.Aug-24-22
1080 What is the difference between USB 3.0, 3.1 and 3.2?Apr-02-22
1099 What makes Sonnet USB 3.2 Cards more reliable than other USB 3 cards?Apr-02-22
1144 Why does Sonnet use only PCIe 2 to connect the two controllers on these 4-port USB 3.2 Gen 2 cards?Apr-18-21
1149 How to configure Linux to use Allegro Pro USB card models USB3C-4PM-E and USB3-PRO-4P10-EMay-04-21
1168 If I put a usb 2.0 and 3.0 device on the same controller will the speeds for the 3.0 device drop to 2.0 like older split-port controllers?Dec-07-21